Full boost

[madmax02]

Alright guys, I'm trying figure out why I'm not reaching full boost. My moonshine tunes should be reaching 30-35psi according to tony. My stock bridge was blowing the orings out. So I put a hsp 3" bridge in along with 3" cold and hot side pipes. I'm still only able to hit 22psi. What should I be looking for? I'm not getting any fuel codes or anything.

 

[dbev24]

Could it be the edge not reading above 22psi?

 

[superswamper003]

The edge cts cant read over 22 psi, your definetly making alot more than 22 psi lol

 

[Dirtymaxx03]

Put a mechanical gauge on it

 

[THEFERMANATOR]

If after you put a mechanical gauge if it still isn't hitting full boost you may want to pull your intercooler and check it for leaks. The 01-05 intercoolers are known to leak at the end tanks in the bottom.

 

[SickLL7Crenshaw]

The edge cts cant read over 22 psi, your definetly making alot more than 22 psi lol

My edge hits 24psi.. while my autometer is actually hitting 55psi lol

 

[andy-stevenson]

Try taking a look at the "records" setting on your edge. Mine only displays to 22psi but will record a max boost record of 35.

 

[madmax02]

Under the records it said 23psi. I had no idea the edge wouldn't read above 22 or so psi.

 

[Ne-max]

Yep. That's one of the big down falls of a cts on a lb7.