fuel issue of some type

[nate.mchugh1986]

So I have an 02 lb7 with 214k. I've had this truck for less than a month. I don't know what it has had for work other than a built tran, new fly wheel, starter, new glow plugs, efi live on the fly. Went out to start it this morning and it just cranked and cranked. Doing some research I've figured out I definitly have a bad fpr, I'm just trying to figure out if that would cause a no start. I primed the piss out of it and it still wouldn't start. I'm poping a code but can't read it on the edge scan tool for my buddies truck. Any advice or thoughts would be appreciated.

 

[aklbz]

Trying retrieving the code and going from there. How was the primer when you first went to prime? Are you running a lift pump?


Sent from my iPhone using Tapatalk

 

[nate.mchugh1986]

Primer was soft, but it had been setting over night. I don't believe I have a lift pump.

 

[aklbz]

Has it been running fine up until this?


Sent from my iPhone using Tapatalk

 

[nate.mchugh1986]

It's had a rough idle and hard start since I got it. Did the glow plugs and a coolant flush and put the block heater on a timer and it kinda helped the rough start, had it plugged in last night just to be safe, and just wouldn't start. It also goes into the 2grand limp mode when going up a hill. Shimmed the fprv but it still has been doing it.