flywheel bolts

[sweetdiesel]

GM recomends molylube on the bolts

when I was at the speed shop pick up some lube,The guy asked why wouldn't I use loctite?

what do you guys use if anything?

 

[skintback]

I used red loctite on the one that did and there has be no problem yet

 

[Mike L.]

I put them in as is. No need for loctite as the bolts are stretch to fit and can only be used once safely. Don't forget there is a procedure to tighten them correctly.

 

[MAXLLY]

GM recomends molylube on the bolts

when I was at the speed shop pick up some lube,The guy asked why wouldn't I use loctite?

what do you guys use if anything?

Mike did my trans and they didn't come out of the hole with anything on them, so I put them back in the same way.

 

[sweetdiesel]

I put them in as is. No need for loctite as the bolts are stretch to fit and can only be used once safely. Don't forget there is a procedure to tighten them correctly.

thanks Mike
I have it wrote down at the shop 68ft/lbs and degree degree
either way they are friken tight and I did get new bolts