First time at the track, any tips?

2005LLY

New member
Sep 18, 2011
379
0
0
I have leveling keys in, sleeves, and pitman idler arm braces... Track is a good drive so I wont be able to lower the front end down and drive there so can I do that at the track or does the truck have to be jacked in the air? Also have cooper sst 285s on 16x9" moto metals should I lower the tire psi any? I have traction bars. Any tips you guys could give me would be great.

Thanks, Dylan
 

Philtopgun

Nice n Easy
May 5, 2007
710
0
0
45
Edmond,OK-still a Texan
You can lower it either way. I always are a rolling jack with me and lower it when I get to the track. Use the jack to make it easier to raise the front in back up. Remember to either mark ur bolts or remember how many rounds u went on each bolt when u lower it all the way down with the bolts just a couple rounds in. Then turn the bolts back to where they were to not mess with ur alignment. Lower ur rears just a hair lower than the fronts. My 80lbers I lower them 35/32 front/ rear. Just make sure a gas station with air is close b4 u go home. Lots of peeps like around 2k on rpm to launch, c what ur truck likes, either more or less.