EFILive Error while trying to look at a tune?

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
Ok I'm getting a error while trying to read calibration file, I want to look at my race tune and what all the tables are for it. But I will try to connect to the ECM lbz/35a and it will start to and then throw that error, then reverting back to normal operation? The scan tool and data logging works fine, I just want to read my race tune and look at the info


Sent from my iPhone using Tapatalk
 

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
So any way I can read a individual tune? Lol obviously it's retarded, but I'd like to look around and see certain tables and stuff


Sent from my iPhone using Tapatalk
 
Dec 2, 2006
1,696
0
36
TN
So any way I can read a individual tune? Lol obviously it's retarded, but I'd like to look around and see certain tables and stuff


Sent from my iPhone using Tapatalk

You can read any tune in the ECM as long as it's not a DSP Operating System or the ECM tune is locked by the tuner.
 

GMC_2002_Dmax

The Still Master
There was a very good reason why DSP5 ECM's for 06/LLY, 07/LBZ, 08/LMM cannot be read.......and it's not some conspiracy either.

The Bosch ECM did not have enough room to hold the DSP5 OS in the normal flash area so EFI-Live figured a way to put that information in other areas of the ECM that could be written too but not read from.

So, if you can't read a complete tune file because some areas holding data cannot be read from you have a corrupt tune file if you only get part of the flash retrieved which would do you no good.

Since we know people do not read the directions, don't read the forums for answers they safe guarded the tune files from those people who would try to use a corrupted file.

Hope that clears up the conspiracy theories around here.

;)