EGR pipe to bell housing

[WVRigrat05]

I think?? It's just for the egr, the steel pipe that goes to the bell housing, thing is in my way trying to get to the up pipe bolts, all my half inch shits too big to fit (having to use an adaptor), need to quit being a tight ass and get a couple half inch drive socket sets.

But anyhow, I'm pretty sure guys do away with that pipe, and do I have to plug the bell housing or am I just going to have to fight around it?? Thanks.

 

[TheBac]

Dude, just put down the pipe.








Had to. :hehe:

 

[malibu795]

Talking about the coolant pipe that comes up the DS of the Engine on the LMM?
Swapped elbow out for a LBZ older one

Made a T fitting for heater core supply here

 

[WVRigrat05]

I hear ya Tom, lol, got 90 things going on as usual and running on 2 hours sleep in two days(bout sick of this swing shift BS). So thought this would be easy like the old truck, couldn't think of what it was, yes I'm talking about the EGR cooler pipe. I got the top two broke super easy, I can almost get on the bottom one, gonna have to buy another swivel. I'm hard on 3/8" tools.

Got the old PS cooler out and go figure I loaned out my puller and it never made it back and I got the wrong size push locks for the new cooler. Try it again tomorrow.

 

[WVRigrat05]

Talking about the coolant pipe that comes up the DS of the Engine on the LMM?
Swapped elbow out for a LBZ older one

Made a T fitting for heater core supply here

I can just buy a plate and do away with it all together can't I? One less thing in my way. I'm gonna slap another 4-600 in that motor I guess To clear the clutter, it'll be in the junkyard before I need to have emissions for looks.

 

[malibu795]

I can just buy a plate and do away with it all together can't I? One less thing in my way. I'm gonna slap another 4-600 in that motor I guess To clear the clutter, it'll be in the junkyard before I need to have emissions for looks.

Call up Hicksville Auto 419-542-8500 all they do is Dmax trucks..
They shipped me one for 45-50.00

 

[Blackmax123]

Dhd sells a plug. Then you can route the hose from the thermostats housing. They also sell the kit for that also. I might have the plug and stuff laying around from my lmm.

 

[RickDLance]

We have a fitting you can put in there to run a new hose the way you want it.
https://profabperformance.com/jm2/i...010/product/4-coolant-line-relocation-fitting

 

[Blackmax123]

Sorry Rick,

I forgot about yours. I have one of those laying around somewhere also.