Hello, I am trying to delete the EGR on a 2015.5 LML. I have most everything removed except for the 3 bolts that hold the egr to the up-pipe. I cannot seem to get those three bolts loose, or barely get a wrench properly seated.. Is there a trick or a tool or something I am missing? Crows foot didnt work.. Any ideas appreciated.. Thanks
LML EGR Delete Troubles
- Thread starter DuramaxTireSmoker
- Start date
Get a buddy and a breaker bar, one up top to hold the socket in place, the other to pull on the bar. You can grab em from the wheel well or from below.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
The new body style trucks are a whole lot more difficult than 11 thru 14 trucks. May have to jack the cab off the frame a few inches.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Yes it just seems really really tight against the firewall.. Is there anything i need to know about lifting the cab?
There is enough slack/play in everything to get it off the frame a few inches. There's a ground in the passenger wheel well that needs unbolted iirc. Just pay attention and go slow.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
I take them all out but the back two, which I just loosen but leave in. Then jack up front of cab only unless you have alift. There are 4 on each side
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk