May be wrong category. Does the egr delete, delete the cooler too or just the crossover? Thanks
Greg
Sent from my SM-G920V using Tapatalk
Greg
Sent from my SM-G920V using Tapatalk
LML Egr delete question
- Thread starter motoking_1990
- Start date
Not sure which kit your talking about. But generally speaking most delete "kits" will remove the cooler, and simply block off the open passages left in the intake and exhaust system.
Now if it's a full bridge replacement/delete kit then that's a whole different story.
Sent from my SM-N920V using Tapatalk
Now if it's a full bridge replacement/delete kit then that's a whole different story.
Sent from my SM-N920V using Tapatalk
How much of a pain is this going to be. We are going to install next weekend. He already did the downpipe. Not sure if he got the exhaust done yet. Getting a tune next week as well. ;-)
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
It's not too bad I'll be honest I sat out side an did it in 4 hours sinister calls for 8 hours the biggest pita was the up pipe riser just kinda hard to get back there then pull piping off y bridge the crossover pipe is super simple to get out.
I'm sure we can get it figured out. I just heard from a few it's a pita.
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
Nah I grabbed a few tools out of my bag an went to town few things were kinda tight so I used a ratchet with quite a few teeth an wasn't bad if ya need help just ask done two of them makes much easier for swapping a cp3 in the future:thumb:
Who's y bridge? Guy that we are doing his on, he was wondering about the bridge to get rid of all the stuff.
Sent from my SM-G920V using Tapatalk
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.
[quote name="motoking_1990" post=990501]Who's y bridge? Guy that we are doing his on, he was wondering about the bridge to get rid of all the stuff.<br />
<br />
Sent from my SM-G920V using Tapatalk[/QUOTE]<br />
<br />
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.
How much do those kits run
Sent from my VS986 using Tapatalk
<br />
Sent from my SM-G920V using Tapatalk[/QUOTE]<br />
<br />
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.
How much do those kits run
Sent from my VS986 using Tapatalk
<br />
<br />
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.
How much do those kits run
Sent from my VS986 using Tapatalk[/QUOTE]
Here is the max flow bridge,cold pipe,turbo inlet piece.
http://creaturesofthenightperforman...e-Coldside-Tube-and-Turbo-Inlet-P5596913.aspx
Hot pipe is right here.
http://creaturesofthenightperformance.com/HSP-3-Hotside-Intercooler-Tube-P4974955.aspx
[quote name="hotsauce120606" post=992771][quote name="motoking_1990" post=990501]Who's y bridge? Guy that we are doing his on, he was wondering about the bridge to get rid of all the stuff.<br /><br />
<br /><br />
Sent from my SM-G920V using Tapatalk[/QUOTE]<br /><br />
<br /><br />
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.<br />
<br />
How much do those kits run<br />
<br />
Sent from my VS986 using Tapatalk[/QUOTE]<br />
<br />
Here is the max flow bridge,cold pipe,turbo inlet piece. <br />
<br />
http://creaturesofthenightperforman...e-Coldside-Tube-and-Turbo-Inlet-P5596913.aspx<br />
<br />
Hot pipe is right here. <br />
http://creaturesofthenightperformance.com/HSP-3-Hotside-Intercooler-Tube-P4974955.aspx
Do you have a prebuilt,kit for the LBZ I didn't see 1 in your website and is the got side pipe the same for all the motors?
Sent from my VS986 using Tapatalk
<br /><br />
Sent from my SM-G920V using Tapatalk[/QUOTE]<br /><br />
<br /><br />
I sell these kits it's a Hsp kit. Bridge , cold pipe, hot pipe, turbo mouth piece and down pipe. Deletes Egr and reroutes pcv.<br />
<br />
How much do those kits run<br />
<br />
Sent from my VS986 using Tapatalk[/QUOTE]<br />
<br />
Here is the max flow bridge,cold pipe,turbo inlet piece. <br />
<br />
http://creaturesofthenightperforman...e-Coldside-Tube-and-Turbo-Inlet-P5596913.aspx<br />
<br />
Hot pipe is right here. <br />
http://creaturesofthenightperformance.com/HSP-3-Hotside-Intercooler-Tube-P4974955.aspx
Do you have a prebuilt,kit for the LBZ I didn't see 1 in your website and is the got side pipe the same for all the motors?
Sent from my VS986 using Tapatalk