Edge Insight mounting location

[z71havinfun]

Didn't want it up in the window so someone walking by can see it. Let me know what you think!
Gutted stock tape player, took arm off suction cup that came with the kit, turned sideways and bolted to tape player frame can still use cassette storage box as well as unhook and use handheld

 

[DIESELMAFIAPER.LB7]

My buddy did the same thing on his works good

 

[OregonDMAX]

I had mine there until I realized I NEVER look down there so I moved it to the window and made a custom mount. Nobody can see it unless they are inside the cab. I used a price of aluminum and bent it so tue mount hangs from the headliner and is shielded by the pillar. I'll have to get a pic of it.

 

[DIESELMAFIAPER.LB7]

I had mine there until I realized I NEVER look down there so I moved it to the window and made a custom mount. Nobody can see it unless they are inside the cab. I used a price of aluminum and bent it so tue mount hangs from the headliner and is shielded by the pillar. I'll have to get a pic of it.

They make those mounts have for awhile lol bk adapters makes them just so people know

 

[z71havinfun]

I had mine there until I realized I NEVER look down there so I moved it to the window and made a custom mount. Nobody can see it unless they are inside the cab. I used a price of aluminum and bent it so tue mount hangs from the headliner and is shielded by the pillar. I'll have to get a pic of it.

I always look down there to hold my coffee racing the corvettes on the way to work in the A.M.

 

[OregonDMAX]

They make those mounts have for awhile lol bk adapters makes them just so people know

Oh didn't know they make those hah. Mine is way closer to the pillar, way more hidden from people looking in the drivers window and mine was free. :thumb:

 

[DIESELMAFIAPER.LB7]

Oh didn't know they make those hah. Mine is way closer to the pillar, way more hidden from people looking in the drivers window and mine was free. :thumb:

Free is always better

 

[slipclutchms]

Just got done doing this

Came out clean

 

[Blackhawk878]

^Looks like mine

 

[TLyons90]

^ loving these ideas!

 

[z71havinfun]

^Looks like mine

did you have to get the extension harness?

 

[Blackhawk878]

No. Ran the cables across the headliner, down the A pillar and behind the dash to reach the OBD port. My sensor harness (for boost, egt and oil temp) is run the same way and feed through the firewall through the access hole behind the lower fuse/relay block under the dash. All the connections from the various sensors meet right near the master cylinder. So both provided cables were long enough, no extension needed.

 

[Low366Dmax]

View attachment 32179
Just got done doing this

Came out clean

Hey that looks kinda like barbs


Sent from my iPhone