dual cp3

[crash85]

I was wanting to run a dual cp3 setup on my lb7 and my question in Ive got a lbz cp3 laying on the shelf and was wondwering if you could use both of them together or would I need to buy one or the other. not sure if they will work together

 

[TrentNell]

I was wanting to run a dual cp3 setup on my lb7 and my question in Ive got a lbz cp3 laying on the shelf and was wondwering if you could use both of them together or would I need to buy one or the other. not sure if they will work together

They will work together , but I would put a LBZ reg on the one in the valley or a LB7 reg on the LBZ pump , that way they both use the same reg so tunning will be easier .

 

[68skylark455]

Thats what we did. Put the new LBZ in the valley and the belt driven one is an LB7. Forgot to tell Trent that when he did our tunesHad lots of fuel, and I do mean lots-pretty smokey:rofleople were none to happy to be beside me when I was "test" driving:angel:

 

[custom8726]

X3, I ended up taking a new LBZ pump and putting a LLY REG on it to make tuning easier.. I think I am going to end up pulling my LLY pump in the valley and modding it so I have two LBZ pumps for spring though..

 

[jon5212]

Where are you getting the controller to run 2 Cp3's? Also do you guys just have a pulley fabbed up to turn the 2nd one? If so what size pully? Same diameter as the gear on the valley CP3?

 

[crash85]

I was thinking of getting the ppe setup without the cp3. so the only thing I need to do is change the regulator?

 

[ChevyDieselLLY]

I was thinking of getting the ppe setup without the cp3. so the only thing I need to do is change the regulator?

correct, make both regs the same.

 

[crash85]

how hard is it to make your own dual setup?

 

[custom8726]

how hard is it to make your own dual setup?

Not hard if you could find or make the controller.... I went the Industrial Injection route for my twin CP set up, mostly because my buddy is a distributer for them and got me a killer deal on the kit.. The second best price I got was from Henry on here for the PPE Kit and he is probably going to be about the best price you are going to get for the kit with out CP3.