LLY: Dual CP3 Line

[White Duramax]

I have put together a dual cp3 setup- some home-made parts and some bought. The only thing I need is a high pressure line. I have one from an LB7 which obviously won't work. Does anyone know where I can get a line bent or unbent to go to the rear of the left side rail? I do have a fitting for the rail.

 

[racinmike77]

you can use the dual feed line from industrial injection.

 

[Bluemax]

On an LB7 the high pressure line that goes from the junction block to the back of the drivers side rail can be straightened and re-bent to fit from the second pump to the front of the drivers side rail. Looks like it was made for it.