Driver side wheel noise

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
At low speeds I here a churp churp sound like something is loose? at high speeds i can't hear it. Could it be my wheel bearing assembly? it is annoying as all hell. It started after the drag event in October. Could too much fluid in the front diff have anything to do with it?
 

Kat

Wicked Witch of the West
Aug 2, 2006
17,899
13
38
60
Norco, CA
I would left the front end and see if you can woble your tire back and forth. I took out Wendy's other side shorty after the last drag event.
 

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
I would left the front end and see if you can woble your tire back and forth. I took out Wendy's other side shorty after the last drag event.

Really? Kat when your driver side wheel bearing needed to be replaced what sounds came from it?
 

Kat

Wicked Witch of the West
Aug 2, 2006
17,899
13
38
60
Norco, CA
Really? Kat when your driver side wheel bearing needed to be replaced what sounds came from it?

The first one was a squeak but different from the belt. The 2nd one made no noise at all. They found it when checking for the bad lugs, after you and Chris said they might be a problem.
 

LB7Diesel

Oh Boy!
Sep 3, 2006
1,355
0
0
Melbourne, F.L.
Mine does this too. Pulled the tires Friday and the bearings are good:confused:. Maybe check the rotar sheilds. I couldn't find the problem on mine. Thinking maybe it's in the front shafts.
 

Diesel Pilot

Hat? Suitcase? 50 BMG?
Aug 9, 2006
1,424
0
36
47
Pickerington, OH
When my front bearing went it had a slight growl or low grind to it. I could feel it through the steering wheel.

It could be the brake shield, sometimes those get bent back into the rotor and cause a slight chirp. Also, check the back side of the rotors for uneven wear. Mine where totally f'ed up, while the front sides looked good, that could also cause some crazy noises.
 

fast03

Active member
Jun 15, 2008
1,201
6
38
61
Rancho Cucamonga
you have to have the wheel on to really check the wheel bearing so you can get leverage to rock it. Also is the truck wandering on road. Mine was and I hardly realized it since it goes bad slowly. Put a new bearing assembly and no more low grind or wander on the road. Napa has them for $300
 

whitetrash21

put on da damn helmet day
Apr 29, 2008
4,929
0
36
Vegas
I got a chirp chirp as well. It's from having two cracked pads, one on each side. Allows the pads to sag into the rotors .....