Dorman body mounts dont fit...

[Dozerboy]

Anyone use these? Am I missing something? The height probably isn't an issue, but the nub that sticks down in the frame is 1/4" to big. And it's metal so it's not like there is any give like the factory.
Part numbers 924-135 and 924-134

I even looked at another set from another part store just to make sure I didn't get a bad batch.

 

[1TRIKHD]

Anyone use these? Am I missing something? The height probably isn't an issue, but the nub that sticks down in the frame is 1/4" to big. And it's metal so it's not like there is any give like the factory.
Part numbers 924-135 and 924-134

I even looked at another set from another part store just to make sure I didn't get a bad batch.

I havent used them but I was going to order some for my truck. same part numbers i was going to order as well. 924-135 is the front mount part number and the other is the middle mount. kind of odd they would be a 1/4" off.

Sent from my LM-G900 using Tapatalk

 

[Dozerboy]

I havent used them but I was going to order some for my truck. same part numbers i was going to order as well. 924-135 is the front mount part number and the other is the middle mount. kind of odd they would be a 1/4" off.

Sent from my LM-G900 using Tapatalk

Ya I searched online and there was no other comments I could find about them not fitting. Surely there are thousands of these out there in use...

 

[clrussell]

Good to know. I’m about to do some rear mounts on mine as well.. guess I’ll order Gm

 

[jlawles2]

I did urethan mounts on the 04 and the 06. Increases cab noise a bit, but cured the beaming problem I was having.

Check out dmaxstore they install everything they sell, so anything you get should fit. https://dmaxstore.com/products/?route=product/category&path=2290_1063_1422_1454

 

[Chevy1925]

are they all that way? i put dorman mounts in my 02 and they dropped right in. I couldnt get the poly mounts out fast enough lol

 

[clrussell]

are they all that way? i put dorman mounts in my 02 and they dropped right in. I couldnt get the poly mounts out fast enough lol

Yeah no way in hell I am doing poly mounts. Ill put my 400k stockers back on first.

 

[Dozerboy]

are they all that way? i put dorman mounts in my 02 and they dropped right in. I couldnt get the poly mounts out fast enough lol

Yes they are. By looks all the mounts "look" the same. I'm seeing what Dorman has to say. I have the updated GM for the rear and they look fine.

 

[Bdsankey]

Yeah no way in hell I am doing poly mounts. Ill put my 400k stockers back on first.

Could always go to the S&B silicone. They're pricey but ride awesome.

 

[Dozerboy]

Could always go to the S&B silicone. They're pricey but ride awesome.

I figured silicone and Polly would be about the same ride? Ballpark price?

 

[Bdsankey]

I figured silicone and Polly would be about the same ride? Ballpark price?

If it's for the CCSB in your signature it's $699 for EC/CC. RC is $524.

Oldest set I have experience with is around 2 years or so when they first came out, customer wanted a set in his 6.4L ford. Daily driven in the summer/winters up here haven't changed em one bit.

 

[JoshH]

S&B is worth the price. They're very nice, and I've never had a fitment issue.

 

[Dozerboy]

If it's for the CCSB in your signature it's $699 for EC/CC. RC is $524.

Oldest set I have experience with is around 2 years or so when they first came out, customer wanted a set in his 6.4L ford. Daily driven in the summer/winters up here haven't changed em one bit.

That's not horrible when I probably have $450-$500 into what I have now. When recently I wanted to compare another set from a different auto parts store. I think they were gonna charge me a $135 each. I'm not sure if that's a mistake and was for a pair or not but that's double what I paid for them 6 months ago.

I wonder if I can use the front and mid position S&B and the updated GM ones in the rear.

Dorman is still looking into my problem.

 

[JoshH]

The cab mount height should be the same as stock or the body lines won't line up from the cab to the bed. You could buy a regular cab S&B kit if you want to use the updated hydraulic mounts on the rear of a crew cab or extended cab.

 

[1TRIKHD]

That's not horrible when I probably have $450-$500 into what I have now. When recently I wanted to compare another set from a different auto parts store. I think they were gonna charge me a $135 each. I'm not sure if that's a mistake and was for a pair or not but that's double what I paid for them 6 months ago.

I wonder if I can use the front and mid position S&B and the updated GM ones in the rear.

Dorman is still looking into my problem.

Would S&B only sell those two mounts by them selves? Or would they make you buy the whole kit is the question I have.

Sent from my LM-G900 using Tapatalk

 

[1TRIKHD]

The cab mount height should be the same as stock or the body lines won't line up from the cab to the bed. You could buy a regular cab S&B kit if you want to use the updated hydraulic mounts on the rear of a crew cab or extended cab.

Customer support said they are the same height as OEM mounts. So you should be able to do the S&B with the hydraulic mounts in the rear.

Didnt even think about doing the reg cab mount kit w/ the hydraulic.

Sent from my LM-G900 using Tapatalk

 

[Dozerboy]

Well this ain't going my way so far. Rock auto's refusing to give me a refund because it's past their 30 day Return policy.

Dorman says they can't do anything. Rockauto should give me a refund because of the life time warranty. Warranty doesn't really do me any good when the parts where made wrong.

Anyone got a phone number or anything for contact at rock auto? I'm getting really annoyed at this email nonsense. I should have just order the shit from Amazon. I didn't realize this is how rock auto was.

 

[JoshH]

Well this ain't going my way so far. Rock auto's refusing to give me a refund because it's past their 30 day Return policy.

Dorman says they can't do anything. Rockauto should give me a refund because of the life time warranty. Warranty doesn't really do me any good when the parts where made wrong.

Anyone got a phone number or anything for contact at rock auto? I'm getting really annoyed at this email nonsense. I should have just order the shit from Amazon. I didn't realize this is how rock auto was.

How did you pay? If you used a credit card, you can try filing a dispute.

 

[Chevy1925]

Well this ain't going my way so far. Rock auto's refusing to give me a refund because it's past their 30 day Return policy.

Dorman says they can't do anything. Rockauto should give me a refund because of the life time warranty. Warranty doesn't really do me any good when the parts where made wrong.

Anyone got a phone number or anything for contact at rock auto? I'm getting really annoyed at this email nonsense. I should have just order the shit from Amazon. I didn't realize this is how rock auto was.

been there with brand new warped drums from rock auto. I eventually had to file a complaint with the BBB and my CC, then rock auto finally came back and refunded me my money after refusing to take the drums back.

 

[Dozerboy]

How did you pay? If you used a credit card, you can try filing a dispute.

been there with brand new warped drums from rock auto. I eventually had to file a complaint with the BBB and my CC, then rock auto finally came back and refunded me my money after refusing to take the drums back.

Thanks I'll give that a shot.