Donated t-case

duramaxin14

duramaxin14

Just Keeping Up
May 25, 2007
912
0
0
34
Wauchula fl
I went over to a buddy of mine house tonight and was talking to his dad about doing the t-case on my truck. He told me to follow him and he sayed as long as i Win 1 time for him the t-case is mine. Its a divorced tcase. He pulled it off of a loader and rebuilt it. i dont no what the ratio is on it but its gotta be better then not haveing anything
 
dmax tim

dmax tim

just wanta have fun
Aug 16, 2006
215
0
0
35
Freddyville, Ohio
not hard to find out, put tape on all 3 flanges and turn the input, see how far the outputs turn. if the output only turns 1/2 then it's 2:1, 1/4 turn then it's 4:1.

being a loader it may be anything. could even be 1:1 only since some use outboard planetaries.
 
02freighttrain

02freighttrain

Team Salad Bartender
Aug 13, 2006
911
0
0
sootville, Fl
Kurt, I would check the rules before I get to carried away with the swap. Here is what is posted on Keith's website:



Street Stock Diesel (SS) @ 8000 lbs


This is for the daily driver with some aftermarket modifications.
Aftermarket Computers/Programmers, Exhaust and Air Intakes are permitted.
Stock Turbo only.
Rear suspension may be blocked
Hanging weights are permitted.
No Nitrous or Propane.

2WD's running in this class may run 31" hitch height.

Aftermarket computers or programmers are permitted,
OEM transmission & transfer case only, fuel injection pump is limited to a stock appearing, pulling hitches are allowed, u-joint covers and driveshaft loops are required on ALL trucks!


Just an FYI
 
duramaxin14

duramaxin14

Just Keeping Up
May 25, 2007
912
0
0
34
Wauchula fl
Well i got a new t-case again today this one is a chevy t-case. I talked to keith and he told me i needed a chevy t-case. So i traded my loader spicer tcase for a stock aluminum chevy one. This ought to get interesting.
 
You must log in or register to reply here.
Top Bottom