Custom lines hard or flexible

[COMP461]

I am finishing up the pump feed lines on the G.M. Performance Parts Dmax dragster , and I want to go from one pump to the other to balance the rails . I have the 22 inch flexible lines from Industrial Injection. I am driving the pumps at 50% speed to keep them from exploding after a 6000 ramp up. From time on the test bench the pump lose 40 % of their flow after 5000 rpms

 

[RENODMAX]

Quality flexible lines (rated for prooper PSI) should be fine, however hard lines will provide less opportunity for leaks.

 

[COMP461]

I have the longer lines , i need a line that is about 8 inches long to bridge the pumps together .