Converter lock up logging

[2005redlly]

How do you see with Efi live flashscan v2 when the torque converter is locking up. I'm under the scanV7.5 and on the PID (f8). Dont see anything about the converter. Thanks

 

[2004LB7]

Make sure you are logging the TCM and not ECM. The TCC pid are under the TCM

 

[2004LB7]

PS: if you bbx log with v8 you can log both the ECM & TCM at the same time

 

[2005redlly]

Ok thanks. I will do that

 

[TheBac]

Moved to Tuning/Logging section.

 

[2005redlly]

Bump. Can anyone teach me the correct way to log with bbx. I get on bbx and pick some pid that I want to watch, than from there I can't figure what to do next thanks

 

[2005redlly]

Afternoon bump

 

[2004LB7]

check these links out

https://support.efilive.com/kb_article.php?ref=6659-YAHB-3781

http://atptrucks.com/blog/data-logging-with-efilive-autocal-and-v2/

http://www.dynoproven.com/blog/adding-pids-to-your-autocal-or-v2.html

 

[2005redlly]

Thank you.