Info: Clearance and Appearance advice

[Jonesin33]

Bringing truck down from 6" to 2-3ish. Going from 35x12.50R17 to 305x50R20 Nitto 420s... Will these wheels clear?

They are 20x10 with - 24 offset, Thanks


Sent from my DROID RAZR HD using Tapatalk 2

 

[jacobdewey]

It'll be close, but I think you'll make it. I clear my 420's with 20x9 -12mm with my keys all the way down.

 

[Jonesin33]

What wheel spacers will I need in the back?

Sent from my DROID RAZR HD using Tapatalk 2

 

[jacobdewey]

probably a 1.5 or 2" Just measure the fronts in comparision to the rear.

 

[kivetts04dmax]

I'm an inch less than level in the front with my cognito 4" and no rear blocks, I have 20x10 -19 and 305/55 and barely rub backing up at full lock

 

[Jonesin33]

Another option...

20x12 wheels and 325/50/20 ATZs

Sent from my DROID RAZR HD using Tapatalk 2

 

[LWATSON]

Another option...

20x12 wheels and 325/50/20 ATZs

Sent from my DROID RAZR HD using Tapatalk 2

I personally like these wheels allot better.

 

[Jonesin33]

Wanted to go with the other rims because haven't seen them on any Dmax yet but think the wider and deeper is what I'm going to want in the end. 325/50 I think will look sick. Excited when I found out my favorite ATZs come in the size. Only thing that could of been better was 420s

Sent from my DROID RAZR HD using Tapatalk 2

 

[Jonesin33]

Also... Lol and I hope this makes sense, is going from 35x12.50R17 to 325x50R20 (which I believe is 33x13.50 about) going to change my performance? I'm wanting to run quicker but is me coming down a size and going wider going to cancel each other out?

Sent from my DROID RAZR HD using Tapatalk 2