Clear corners

[str8piper]

Hey I have a 07.5 lmm and I have been looking to get clear front corner light but I can't find anything on them any help will be appreciated

 

[str8piper]

Comon ttt

 

[MadMaxx61]

heat them up and split them open pull out the orange part.

 

[Cornell]

I've always put mine in the oven at 225 for 12 minutes to warm the silicon up.

2 butter knives and work your way around.... be careful. Some have just dremeled the lense then siliconed it back shut where the cut was.

Only ever done 99-07 classic trucks though.

 

[gmduramax]

I don't think heating up the lights work on the NBS. I just cut mine open and pulled out the reflector.

 

[crazycrew]

Same for me. I've only done the classic body styles.

Hmmmm. May go to the wrecking yard and get a NBS headlight to experiment.


Sent from My iPhone

 

[Jscherbs]

Same for me. I've only done the classic body styles.

Hmmmm. May go to the wrecking yard and get a NBS headlight to experiment.


Sent from My iPhone

much better idea than hacking up your own. i would go experiment first. :thumb:

 

[crazycrew]

much better idea than hacking up your own. i would go experiment first. :thumb:

Nah. Man. I have an '05. I have done about 15 sets so far

I just wanna see if it can be done on the NBS.


Sent from My iPhone

 

[doops22]

use a dremel to cut the lens off. take off the reflector. reseal. nnbs are harder to take apart so baking them in the oven is harder, more likely to melt or warp it. I posted some videos in this thread from a member that does them on gmfs.

www.duramaxforum.com/forum/exterior/113387-can-you-remove-reflectors-lmm-headlights.html

 

[crazycrew]

Wow. That's a great vid. I may try to find a light or two at a wrecking yard.

Since I have done the classic, I now wanna know how I can do the NBS.


Sent from My iPhone