So after dealing with a caliper that was binding on the pins, I have found my pitman and idler arms are pretty much toast. (It has been a long time since this rig has had a good greasing) Tie rods look like they are good, but they are coming off as well.
My question is this, what is the best part to buy? I have always bought AC-Delco, but I just want to know if there are better parts out there.
I don't think I need the monstrous sized super duty tie-rods, figured I would do the sleeves to gain some strength there.
I was hoping to find some better parts than stock from Rare Parts or the like, but not finding anything.
I have ordered the brace kit from Incognito, I'm glad that is at least available for the LML rigs.
Not planning to do the ball joints right now. They feel tight and look like they have at least had some lube. Also do the lower joints require arm replacement?
Thanks in advance for any help.
My question is this, what is the best part to buy? I have always bought AC-Delco, but I just want to know if there are better parts out there.
I don't think I need the monstrous sized super duty tie-rods, figured I would do the sleeves to gain some strength there.
I was hoping to find some better parts than stock from Rare Parts or the like, but not finding anything.
I have ordered the brace kit from Incognito, I'm glad that is at least available for the LML rigs.
Not planning to do the ball joints right now. They feel tight and look like they have at least had some lube. Also do the lower joints require arm replacement?
Thanks in advance for any help.