Boost ???

[wdino73]

I've got a question I hope that it's not a stupid one, OK here goes, I've been having some problems with my truck it is missing an cutting out sn no power, I took it to GM they said it was the turbo it would only boost around 17psi, but they way it was running I just not think it's the turbo, I think I've got a couple of injectors bad, I'm taking the injector to get checked in the morning, my question is if the injectors are bad an the engines not fueling right then the boost can't build correctly, is this correct, I've had a boot come off before an the engine had no power but it wasn't missing an cutting out, I just thought I would ask you guys, I can only deal with one problem at a time, Man I'm so tired of all this. Please advise

 

[paint94979]

I've got a question I hope that it's not a stupid one, OK here goes, I've been having some problems with my truck it is missing an cutting out sn no power, I took it to GM they said it was the turbo it would only boost around 17psi, but they way it was running I just not think it's the turbo, I think I've got a couple of injectors bad, I'm taking the injector to get checked in the morning, my question is if the injectors are bad an the engines not fueling right then the boost can't build correctly, is this correct, I've had a boot come off before an the engine had no power but it wasn't missing an cutting out, I just thought I would ask you guys, I can only deal with one problem at a time, Man I'm so tired of all this. Please advise

this might be quite a trivial question but do you have a log man? sorry to hear about all of these issues

 

[wdino73]

Yeah I logged it I don't know how to post it, but I'll try an fiqure it out, or just pm your email an i'll ship it to u that way, thanks paint..

 

[paint94979]

[email protected]

 

[JoshH]

If you zip it you should be able to attach it to a post.

 

[wdino73]

See if that works

 

[paint94979]

See if that works

there you go i was just about to post it LOL

 

[Akdiesel]

I too am really sorry about all your troubles brother...hopefully you get this all resolved and get her up and running

 

[paint94979]

Dino, your log looks great man? holds 26k+ rail pressure... 2500pw. Timing is kinda low at 23* but nothing pops out saying this or that is bad. It looks like your turbo could be suspect as nothing in the tune looks bad

 

[wdino73]

It's only fuel at 98mm, it's normally at 120mm, here's a log of when it's running right. It hits 120mm, I was running out of road. LOL

 

[paint94979]

It's only fuel at 98mm, it's normally at 120mm, here's a log of when it's running right. It hits 120mm, I was running out of road. LOL

its all how the tune is setup... on that last log you posted you were only getting 14* of timing? no high enough... PLUS you only had 2000pw. Who is doing your tuning?

 

[wdino73]

Trent an I've tuning on it, I'm trying to stay safe, I didn't want to break something again, but if u put the stock tune in it still misses an cuts out???