Bigger injectors

[ecc_33]

I am trying to wiegh out the benefit of getting bigger injectors. My truck is running Extremely lean right now! I am thinking of getting 40% bigger? I think that would be good for if and when i ever want to get more air in the future. Could i really get that much more fuel outa another cp3 with stock injectors? I dont think i could find the amount of fuel i need out of just a cp3 but im not sure...Maybe im wrong. Truck looks like im running a 500hp shot of nos right now and the manifolds/up pipes/down pipe glows Very bright orange for about 15 seconds at the end of the track

What brand though? Don M/F1diesel....Crank it up diesel......ATS diesel....Kennedy diesel.....Kerma..... Dynomite diesel

Whats the big difference in everyones injectors?
I think 40 over would be a decent set but not sure which ones to stay away from and why...Thanks in advance

 

[duramaxin14]

I beilve steve was running ats injectors. I think now he is running dynomite im not for sure though. He may have went back with another set of ats

 

[bullfrogjohnson]

eric do you think the stock cp3 with sd reg will be able to recover fast enough to keep up with 40 over?

 

[02freighttrain]

I'm running 47% Extrude Hones. They flow closer to 45. No rail pressure drop over stock injectors. Still 26,000 and steady up top.

 

[bullfrogjohnson]

but your running duel fuelers steve, what about a single?

 

[dieselson]

Seems like you wouldn't quite be able to keep up with 40% with a single CP3, maybe go with like MDE 29% for singles or Don M 40% for duals

 

[Diesel Pilot]

I think Industrial makes a set that is around 25%, maybe give them a call.

I'm guess there is no way you could get more fuel with bigger injectors and be able to keep it above 20k psi rail pressure.

 

[ecc_33]

i wouldnt be able to keep them up to 23,500 like right now but i dont see why i couldnt get more fuel out of them with a smaller fuel shot and like 20,000psi of rail pressure.
Besides i would get 2 cp3's with injectors...i just dont know what brand of injectors...im leaning torwards Crank it up, or Don M's