Best wheel hub

[DefiantArms]

What are the better choices of wheel hubs local big box store has driveworks and moog about 100$ difference in the two. Also are you able to hook efi live up to the truck and read the wheel bearings? I've done it on my old truck with a fancy diagnostic tool but not sure if efi live will do it or how.

 

[blue09dmaxx]

Timken

 

[Harbin_22]

I put el cheapo $50 ones from eBay on my 1/2ton and have been trouble free for 40k. Not saying that's what you should do, but I think they are all junk :roflmao:

 

[ScreaminDuramax]

Timken

 

[ironmax]

I bought Timken from auto zone and there still going strong. I have 150k on them

 

[DefiantArms]

Sold on timken than. I'll replace both just to be safe

 

[Dmax87]

Ordered moogs off of rockauto. Can't beat their prices!!!

 

[DMAXchris]

What are the better choices of wheel hubs local big box store has driveworks and moog about 100$ difference in the two. Also are you able to hook efi live up to the truck and read the wheel bearings? I've done it on my old truck with a fancy diagnostic tool but not sure if efi live will do it or how.

EFILive isnt able to read the wheel speed sensors. Need a TechII for that.

X4 on Timken. AutoZone usually stocks them. They had the best price I could find, and no shipping.

 

[PureHybrid]

Not sure on AutoZone price, but I picked up a pair of timkens for $150/ea on Amazon.

 

[04chase]

not sure what stocks are but i just did replace both of mine on my new to me truck(07 classic lbz) with 80k miles , it had timkens and one was bad and the other had some movemoent but not terrible. I went with napa cheaper versions. about 160 each. so far so good but i also did make a few other upgrades that should help them last longer including flatter c/v angles.