BD Turbo in LBZ

RiPPeN

New member
Oct 14, 2009
23
0
0
Calgary AB Canada
VGT Delete (BD Turbo) in LBZ

Put a BD Turbo in a LBZ. BD's instructions list that I only need to delete these codes below through EFI Live. I do not get anymore codes after reflashing the truck but the engine only runs WOT for 3 seconds then governs itself to 2000RPM.
Does anyone know what to adjust or what is going on?

These are the codes I was told to delete via BD's instructions.
P003A
P0045
P0234
P0299
P0401
P0402
P2563
P2564
P2565
P0108

Thanks
 

RiPPeN

New member
Oct 14, 2009
23
0
0
Calgary AB Canada
Put a BD Turbo in a LBZ. BD's instructions list that I only need to delete these codes below through EFI Live. I do not get anymore codes after reflashing the truck but the engine only runs WOT for 3 seconds then governs itself to 2000RPM.
Does anyone know what to adjust or what is going on?

These are the codes I was told to delete via BD's instructions.
P003A
P0045
P0234
P0299
P0401
P0402
P2563
P2564
P2565
P0108

Thanks
 

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
got it.

B0792, I set all cells to "120" and no problems since.



Not bad for not looking at a LBZ tune for a year :rofl: :thumb:
 

Colt

New member
Jul 23, 2010
523
0
0
On the issue of LBZ EGR deleted now I have a lot more go etc. I wondered where guys are tuning with EFI for a nice power curve without killing the tranny. It dyno'd 486 hp and 790 tq. on a dynojet after delete was done with stock turbo, injectors, PCV reroute, and a powercore air filter I'm using up until I change back to my AFE oil type air filter. Truck feels real good just wondered if anybody could chime in about similar results. IM me if you want to tell me your truck's ending power area. Have Raptor lift pump too.
 

Colt

New member
Jul 23, 2010
523
0
0
No problem just see cross topics in other threads but you don't have to recognize mine I'll do a new one later when time permits so you can miss it and stay in the places you own.
 

Slammed2007Lbz

Super Spicy Tunaz
Feb 1, 2009
1,118
0
36
NE Ohio
Does the factory elevated idle still work like normal? Thanks

I haven't tried it yet on mine because it gets stored in the winters. I don't see why it wouldn't work cause it should just be adding fuel for elevated idle unless I'm wrong like usual and it has something to do with the vanes on the vvt?