i lost one last night and hurt the other.. now my service air bag light/message will not go off...
WTF happened?
WTF happened?
LMM: bats die now air bag light is on
- Thread starter malibu795
- Start date
You hit a bat?!? That's pretty impressive :roflmao:
But seriously, you are going to have to reset the airbag module I'm not sure if a v2 has the capability as I have never dealt with it, but on salvaged cars it happens all the time.
But seriously, you are going to have to reset the airbag module I'm not sure if a v2 has the capability as I have never dealt with it, but on salvaged cars it happens all the time.
May have been coincidental, or just a fluke voltage spike/drop. There's a procedure of relearning the SIR system to the body control module we have to do sometime with module replacement/reprogramming. Get the code so we stop guessing lol
V2 wont read it, scanner at AZ wont read it either..... gues i can disconnect the bats for the night and see what that does
I know this is from 13 but have a question.
Have an 08 lmm was in a front end collision. Airbags deployed. Hook up tech 2 and won't find ecm. Do I need to reprogram, relearn, or replace the airbag module to get the truck to start communicating with itself again ?
Sent from my SM-G900V using Tapatalk
Have an 08 lmm was in a front end collision. Airbags deployed. Hook up tech 2 and won't find ecm. Do I need to reprogram, relearn, or replace the airbag module to get the truck to start communicating with itself again ?
Sent from my SM-G900V using Tapatalk
Well it's not running but we can hook up batteries and put key in and go to turn it on and nothing. Like nothing is communicating
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Hasn't gone off in the 2.5. Years
and had 3 sets of batteries and almost 175,000miles since it came on
Would putting a new air bag module in solve this 08 not communicating with the ecm? Do I need new bags and sensors as well?
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk