Autocal help

[Rancelot211]

Autocal won't let me log or anything. Says pilot1mt. Any help with this would be appreciated.

 

[Rancelot211]

Anyone?

 

[Nathan.]

Have you been able to log data in the past? If your autocal is glitching out I believe there is a way to format and reinstall the software. Obviously it would be very important to save your tunes first. I would either post this in the EFI Live section or even better, call up your tuner or EFI Live Support.

 

[c20elephant]

Autocal's are the "responsibility" of the tuner it is linked to, you most likely will receive the same response on the EFI forums or nothing at all.

Have you loaded the PID selection from the scan and tune software to the Autocal and do have an SD card in the Autocal.?

EFI codes

http://www.mjetuning.com/ac/V2%20&%20AutoCal%20-%20Error%20Codes.pdf

 

[Rancelot211]

Got it fixed. Was never set up to log. All engine controllers were selected. Thanks bud!