Auto Meter Help

[Vrabel]

I was pulling out my gauge pod so I could replace boost hose. Upon doing so, I apparently made my wires too short and 2 wires (red & black) pulled out of plug for EGT gauge. It's a C2 type gauge, but I wold assume that all the multi wire plugs would be the same. What I need to know is color indexing so I can just pop 2 pins back in (hopfully).

 

[JoshH]

I'll try to take a look at mine tomorrow.

 

[Vrabel]

thanks

 

[JoshH]

Ok, here is what I have. This is looking at the back side of the plug (where the wires come out) with the clip/latch thing at the top.

empty-empty-black-empty-red
empty-white-empty-yellow-red

 

[Vrabel]

cool thanks