August '24 Chat -- Its too damn hot!!

Status
Not open for further replies.
NC-smokinlmm

NC-smokinlmm

<<<Future tuna killer
May 29, 2011
5,201
363
83
At Da Beach
The rubber duck shit is beyond me. I don’t get it. My son would win one if he was first in his heat at swim competitions and some parents would put them on their dash for bragging rights. This was about 5 years ago. Now I see people everywhere with little rubber duckies on their dash and I know not everyone I see has kids who participate in travel swim (we all know each other haha). WTF is going on with rubber duckies? I’m lost…
 
malibu795

malibu795

misspeelleerr
Apr 28, 2007
8,238
550
113
42
in the buckeye state
Well harvest season is 8-10 weeks out and will be here next weekend here in Ohio.
uncle called said you're better at this than I am, got two semi loads left in the bin and bearing is shot in the unloading auger. AFAIK he hasn't touched this since he bought the place in '90 and it came with the property.

Someone stuck the grease zert facing where my finger is pointing with no access to it, definitely wasn't easily visible.. I'll fix that on the install.
Steel shaft, an aluminum pulley, and 34+ years or elements doesn't bode well lol
Bought new pulley because if he didn't guarantee the old one is getting destroyed 😂

If I can't press them off it will be either cut or liquified
 

Attachments

  • IMG_20240809_190659559.jpg
    IMG_20240809_190659559.jpg
    522.3 KB · Views: 17
  • IMG_20240808_191541475.jpg
    IMG_20240808_191541475.jpg
    366.6 KB · Views: 11
  • IMG_20240807_184252751.jpg
    IMG_20240807_184252751.jpg
    559.5 KB · Views: 10
  • IMG_20240809_190655603.jpg
    IMG_20240809_190655603.jpg
    553.4 KB · Views: 8
  • IMG_20240808_191433586.jpg
    IMG_20240808_191433586.jpg
    546.8 KB · Views: 9
  • IMG_20240808_190322318.jpg
    IMG_20240808_190322318.jpg
    374.8 KB · Views: 13
  • Like
Reactions: kidturbo, darkness, lutzjk913 and 1 other person
2004LB7

2004LB7

Well-known member
Dec 15, 2010
6,982
2,145
113
Norcal
Playing around with the EFILive scan tool trying to get the service regen started. Clicked the desired RPM button and the RPMs dropped down to about 250. And it kept running. Never had it do that before and still idled without stalling

Source: https://youtu.be/s6gb5pqMSvA
 
1FastBrick

1FastBrick

Well-known member
Dec 1, 2016
2,541
1,069
113
Junkyard
I haven't had to do it on a Dmax but I did have to force it on a 2016 Dodge. Apparently it has to be a certain temp in order to force it with a scan tool.
IIRC, the ECT had to be at a specific Temp. like 175 or something like that. So I had to bring it up to like 1500 or 2000 Rpm to get the heat up in the cooling system.
 
  • Like
Reactions: 2004LB7
2004LB7

2004LB7

Well-known member
Dec 15, 2010
6,982
2,145
113
Norcal
1FastBrick said:
I haven't had to do it on a Dmax but I did have to force it on a 2016 Dodge. Apparently it has to be a certain temp in order to force it with a scan tool.
IIRC, the ECT had to be at a specific Temp. like 175 or something like that. So I had to bring it up to like 1500 or 2000 Rpm to get the heat up in the cooling system.
Click to expand...
That's what I was attempting to do by raising the RPMs. But instead of raising it would go down to 250 and stay there no matter the setting. V7.5 DVT works to raise RPM correctly but rain out of time and called it for the day. Might try again tomorrow. Or maybe take it for a drive and see if it does a regen on the road or gets enough heat in it to do a service regen.
 
  • Like
Reactions: 1FastBrick
malibu795

malibu795

misspeelleerr
Apr 28, 2007
8,238
550
113
42
in the buckeye state
TheBac said:
Ive seen things like what Adam dealt with at the farm repair shop on my route. I feel so bad for those guys when someone brings in a broken manure spreader.....
The "four seasons of farming" -- planting, fertilizing, harvesting and fixing.
Click to expand...
Pretty much..
We pressure wash planting and harvesting equipment and go through them and go through them.
Those battery powered grease guns are awesome when you have over 100 grease points, grease is cheap, but man do you get a forearm work out😂

Last thing you want is finding a burnt bearing after a fire🤦🏻‍♂️
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,678
5,821
113
Phoenix Az
1FastBrick said:
I haven't had to do it on a Dmax but I did have to force it on a 2016 Dodge. Apparently it has to be a certain temp in order to force it with a scan tool.
IIRC, the ECT had to be at a specific Temp. like 175 or something like that. So I had to bring it up to like 1500 or 2000 Rpm to get the heat up in the cooling system.
Click to expand...

Correct. Engine temp up to 178 or more, egt’s must be at a certain amount and like 5 other things too.

2004LB7 said:
That's what I was attempting to do by raising the RPMs. But instead of raising it would go down to 250 and stay there no matter the setting. V7.5 DVT works to raise RPM correctly but rain out of time and called it for the day. Might try again tomorrow. Or maybe take it for a drive and see if it does a regen on the road or gets enough heat in it to do a service regen.
Click to expand...

Long ago, Steve and I were playing around in the limo and he says “hey wanna see a lope tune that’s far closer to what those sled pullers have on their p pumps?” I was like “sure!” Dropped idle to 400rpm and sure as shit, truck loped like a built up p pump truck lol.

Nooooo we didn’t run the damn thing around like that. Even back then we knew it was gay
 
  • Like
Reactions: 1FastBrick
2004LB7

2004LB7

Well-known member
Dec 15, 2010
6,982
2,145
113
Norcal
Chevy1925 said:
Correct. Engine temp up to 178 or more, egt’s must be at a certain amount and like 5 other things too.



Long ago, Steve and I were playing around in the limo and he says “hey wanna see a lope tune that’s far closer to what those sled pullers have on their p pumps?” I was like “sure!” Dropped idle to 400rpm and sure as shit, truck loped like a built up p pump truck lol.

Nooooo we didn’t run the damn thing around like that. Even back then we knew it was gay
Click to expand...
Oddly mine was running smooth. Very quiet too. Oil pressure was probably way to low to be safe for extended time
 
Status
Not open for further replies.
Top Bottom