Info: Are you at risk? Check pics

[E.carter]

So I have not been able to hold my drivers side hot pipe on over 30 psi for awhile(kept blowing boot off) so I ordered a mbrp 3" pipe. I installed it tonight and here is what I found.
If you have stock intercooler pipe and boots I would really consider upgrading them. I have just over 55,000 miles on my truck and I can only imagine how fun its going to be to try and get the inner liner of the boot out of my intercooler. The mbrp pipe fits perfect and looks very good and many vendors here sell them..... Sorry they are crappy cell phone pics

 

[arneson]

Wow. Hope mine don't look/do that. What would u buy to upgrade and where? I havnt had problems there, mine is 45ilbs+ at the y-bridge elbow. Keep blowin that out where the elbow with the twin o-rings are. Finding all the issues now since I put twins on. I made a bracket to hold it in, been holdin 55-58 now. Gotta buy a pro fab kit next.

 

[blk smoke lb7]

not good

 

[RPM Motorsports]

http://www.duramaxdiesels.com/forum/showthread.php?t=35841

 

[Subman]

Change out that pipe to get rid of that bent boot going into the innercooler. use a straight boot from the pipe to the innercooler.

 

[Swisstyphoon]

PPE just came out with a new silicone hose kit, you can also buy any hose seperate
http://www.pacificp.com/store/index...id=350&zenid=1943c159b35c3f91877788bcc31ae994

 

[duramax hd]

PPE just came out with a new silicone hose kit, you can also buy any hose seperate
http://www.pacificp.com/store/index...id=350&zenid=1943c159b35c3f91877788bcc31ae994

Those are actually really nice looking :thumb:

 

[LBZrcks]

PPE just came out with a new silicone hose kit, you can also buy any hose seperate
http://www.pacificp.com/store/index...id=350&zenid=1943c159b35c3f91877788bcc31ae994

I've got some of their boots on mine, they're really nice

 

[Atouchofgrass]

Yeah, those PPE boots are very nice! Check out their video :roflmao:

 

[bradyn]

I got all of mine from silicone intakes, they are thicker than factory amd once you clamp them tight they seem to almost bond to the piping, atleast mine do, plus there pretty inexpensive.