So I have an aftermarket Boss head unit. All stock bose speaker package with the bose. I am installing 2 10inch subs. I dont know if subs are the way I want to go so im just maching stuff up. What do I need to do to just run an amp for the subs and nothing else? I know there is a stock amp that in the truck used when the bose package is in your truck. Im very new to the stereo stuff forgive the dumb questions.
Amp with Bose
- Thread starter MaxComp88B
- Start date
You can tap into the speaker to get speaker level signals if your amp supports it. Or use the balanced line levels. Depends on what your amp is capable of using. Personally I'd use the balanced lines coming out of the radio and before going into the bose amp. Does your Boss unit have aux outputs that you can use?
Yes it has aux outputs. So basically wire it up just like normal coming out of the auxiliary output to the amp and then the sub and never touch the bose amp? Do I need to get anything special for it?
*May also need a crossover for subs, unless there is a passive one in the speaker box or an active one in the amp or head unit.
I ran it directly from the head unit to the aftermarket amp and to the subs and it works great.
