After 1 year they're in

[paint94979]

I finally got my gauges, centerlink, and tie rod sleeves installed. I have had the gauges for a year, the tie rod sleeves since August 2006, and my centerlink since May. Now I can go racing.

 

[LBZrcks]

I finally got my gauges, centerlink, and tie rod sleeves installed. I have had the gauges for a year, the tie rod sleeves since August 2006, and my centerlink since May. Now I can go racing.

Time to hit the track Nick!! what are your egt's like?

 

[Kat]

Isn't your track open tomorrow night for tnt? :driving:

 

[paint94979]

Isn't your track open tomorrow night for tnt? :driving:

No TnT ever at Sear's Point which is not good, only bracket racing. I need to get an alignment and new tires.

 

[paint94979]

Time to hit the track Nick!! what are your egt's like?

i only saw 1400 but I havent ran it a full 1/4 yet. I also only saw 30psi.... i think my intake which is the stock piece with original air filter might be robbing the turbo of air.

 

[LBZrcks]

No TnT ever at Sear's Point which is not good, only bracket racing. I need to get an alignment and new tires.

Isn't Infineon the same place?

 

[LBZrcks]

i only saw 1400 but I havent ran it a full 1/4 yet. I also only saw 30psi.... i think my intake which is the stock piece with original air filter might be robbing the turbo of air.

oic, gotcha

 

[Kat]

No TnT ever at Sear's Point which is not good, only bracket racing. I need to get an alignment and new tires.

I thought you where close Infineon? But it looks like it's next Wed.

http://infineonraceway.com/schedule/dragstrip_schedule/

 

[LBZrcks]

I thought you where close Infineon? But it looks like it's next Wed.

http://infineonraceway.com/schedule/dragstrip_schedule/

was just on that same page:rofl:

 

[paint94979]

I thought you where close Infineon? But it looks like it's next Wed.

http://infineonraceway.com/schedule/dragstrip_schedule/

I am 10 min away from Infineon Raceway(Sears Point was it's original name) Im gonna shoot for next wednesday my helmet needs to be here before I can race.

 

[Kat]

was just on that same page:rofl:

Great minds think alike ?

 

[Turbo Buick 6]

I finally got my gauges, centerlink, and tie rod sleeves installed. I have had the gauges for a year, the tie rod sleeves since August 2006, and my centerlink since May. Now I can go racing.

Its about time:hello:

 

[Turbotug]

Thought I was doing good to finally get the dual Taurus fans mounted today, after they sat on the garage floor for six months or so.

The train horns and rear air bags are another story though. They might have a couple years worth of dust on them..

 

[The Neens]

my helmet needs to be here before I can race.

Nope, go racing...You don't need a helmet until you get into the 13s

 

[Diesel Pilot]

Nope, go racing...You don't need a helmet until you get into the 13s

:rofl:

You'll get at least one pass in before they tell you to go home.

I do the exact same thing with parts. I have a "Duramax" pile down stairs with fuel pump, intake, FPR, and soon to be gauges and intake track. Then one day when the wife is in a really good mood. "See ya honey, I'm going to work on the truck for the next 10 hours."

 

[ruffmanatv]

Congrats on finally getting to all you stuff. Just got to some of mine this week too.

 

[slowlmm]

i only saw 1400 but I havent ran it a full 1/4 yet. I also only saw 30psi.... i think my intake which is the stock piece with original air filter might be robbing the turbo of air.

need more fuel to make the boost welcome to the 40-94 tuneing arena tht thing should make 38 psi constantly make sure you check the fitting from the intercooler pipe on pasanger side theres a little o ring in there tht if isnt there will be loosing major air

 

[coldLBZ]

I have gauges, BD manifold, SD manifold, tie rod sleeves, and pitman/idler arm braces sitting on the shelf. Hopefully I get some time here soon.

 

[LBZrcks]

need more fuel to make the boost welcome to the 40-94 tuneing arena tht thing should make 38 psi constantly make sure you check the fitting from the intercooler pipe on pasanger side theres a little o ring in there tht if isnt there will be loosing major air

LilLY's don't have that connection like LBZ's and LMM's iirc

 

[paint94979]

LilLY's don't have that connection like LBZ's and LMM's iirc

ya for the install we didnt have to touch the passenger side intercooler pipe