8.62 @ 161 video

[bcdeutsch731]

https://www.youtube.com/watch?v=LZmkfdr9LQs

Went to Byron Dragway with Mark Broviak on Saturday and first pass out I ran a 8.62 @ 161. This is the first time I have run my truck on the big tune. Mark made some changes and I ran again but stupid me forgot to turn the lift pump back on after Mark got done with updating my tune. With no lift pump I still ran a 8.9 @ 151. I can not thank Mark enough for coming out and helping me!!

Everyone always ask about my motor so here are some details
Danville built motor 40over cast fingers pistons 15.5-1, internally balance stock LB7 crank, SoCal 9100af.
Wagler Competition Race heads. Wagler also did all the machine work and balancing on the engine.
Exergy 175% over injectors. Two Danville modded LBZ pumps. One Airdog 200 lift pump.
Bullseye Power triple 75 mm turbos all piping and manifolds done by HSP
Rossler turbo 400 with Neal Chance converter.

Could have not done it without my Family (dad, mom, wife and kids) and sponsors that have helped me out so much!
Danville Performance
Wagler Competition
HSP Diesel
Bullseye Power
Neal Chance Racing Converters
FlexiCorps Racing
Mayeda Motorsports
Deutsch's Truck Repair

 

[bcdeutsch731]

https://m.youtube.com/watch?v=PaHPpQoXDfs

This video is 10 min long video that shows most of our day at the track. Its really not worth watching because I suck in front of the camera. Lol But if you want to east 10 min of your day the video guy does a great job.

 

[lutzjk913]

Congrats man!

 

[Awenta]

Love the truck!! Hooked nice! Great run, congrats!

Sent from my SM-N910V using Tapatalk

 

[duramaxzak]

Awesome run!

 

[lutzjk913]

I gotta ask though. What's up with the plastic wrap on the rear?

 

[Awenta]

Keeping the paint clean from kickup

Sent from my SM-N910V using Tapatalk

 

[DaveB]

Good job buddy! It's too bad the rain came.

The plastic is to keep the rubber off the paint. It's good stuff, Brett got us hooked on it.

 

[TheBac]

Congrats Brett! :thumb:

 

[Dukcaln]

congrats thats :thumb:

 

[Hot COCOAL]

Damn...
Damn
DAMN!

DAMN! Just staging that beast is intimidating!
Watching the chassis squirm all the way down the track is sumthin else

Helluva run man, keep it up Brett!

Congrats to everyone involved! Tuning sounds wicked Mark
:thumb:

 

[rfletes79]

Wow. Very impressive, great job!!! What is the steam (??) coming from the cooler while staging?

 

[Hot COCOAL]

Its just the flames inside the belly of that beast getting ready to be unleashed...

Or the coolant from the last Ford/Dodge it just ate...

 

[56taskforce]

Wow I want to see it in person great job!!!:thumb:

 

[motoking_1990]

I saw it last year at Sheid and this thing is a beast in person! Very temping to build a c10 love the year! Congratulations

 

[56taskforce]

I need a tube chassis and a ton of cash I have a. 71 that is in great shape.... The wife would divorce me

 

[RPM Motorsports]

Congrats bud, truck is looking awesome for sure!!:woott:

 

[bcdeutsch731]

Wow. Very impressive, great job!!! What is the steam (??) coming from the cooler while staging?

I was having problems with high intake temps so I installed a couple spray bars on the front of the intercooler to spray CO2.


Thanks guys. We have been taking baby steps since early last year. Now that everything is holding together we're stepping up the power little by little. I can't wait to get it back to the track and make some more runs!

 

[bcdeutsch731]

Congrats bud, truck is looking awesome for sure!!:woott:

Thanks Russ! I'm so sorry about your car. I'm just glade Rob is OK.

 

[Stingpuller]

Awesome job!

Nice to see a duramax running that good!