650 HP ETs???

[KidwickedLMM]

Hey guys roughly what would a 7100lb ECLB run in the 1/4 with 650hp? On Proxys

 

[BHoward6.6]

Your estimated ET is: 11.97
Your estimated MPH is: 112.11

 

[paint94979]

You'll go low 12's ET is very dependent on a well setup truck

 

[x MadMAX DIESEL]

Whats done to the truck that you have 650? jw

 

[KidwickedLMM]

Whats done to the truck that you have 650? jw

Its got a cummins in it it doesn't have 650hp. Just curious if I ever does.

 

[Iceman56]

My red truck wieghed about that it went 12.2 @ 111mph with a not so good 60' (high 1.7's). That was the only time at the track and a tougher track I think. I think if I tried I could've got it in the 11's

Truck had MPI small twins, 40% injectors, Rob's tuning. I would think that would be close to 650hp

 

[SmokinHotLLYGirl]

Well, my husband is 629hp and he raced at FASS Nationals in Indianapolis and the fastest was 12.77 @ 108. But it was 95 degrees out that day. He has a RG/LB. and ran on 35x13.50x20 MT ATZ's. It just depends on your set up and tuning. He is on here smkndmax05. Get ahold of him if you have any questions!

 

[Subman]

The ComD calculator says approx 12.1 at 111, lose some weight and get it into the 11's easy.

 

[Jscherbs]

I dont know if I'm at 650 but i did have a 1.62 60ft and ran 12.27 @ 109.9 with a big boost leak.

boost leak is all fixed now so im going to try for my 11 this weekend but im not counting on it.

 

[WisconsinHick1]

I went 12.95 @ 109 mph and a horrible 2.20 60ft. I should be in the range of 650hp and will be happy if I hit 12.5 or less. About 7200lbs CC/SB 4" lift, and 33" BFG's.