Question: 6.7 Cummins Dpf Delete

[speedmetal6.6]

This question is for a buddy of mine with a 07 dodge 6.7 cummins. Who makes a dpf delete programmer for it, you know like the PPE hot+2 DPF delete Xcelerator for the LMM's I couldnt find any info on ppe's website for either, but I know they make one for the duramax.P.s If you can find out what else he needs to make the codes go away after he straight pipes it let me know ( Thanks )

 

[Alligator]

No one that I know of makes one, but I have a delete pipe and a simulator from DPF-R that takes care of that w/o the use of a tuner...http://www.alligatorperformance.com/product_info.php?products_id=3460

 

[Alligator]

I just found one, it's by HS performance $999.00 shipped. I have access to these, they just came out and I was looking at some paper work on it just now. http://www.hs-performance.com/p-62-xrt-race-tuner.aspx

Let me know if I can help with this.

Chad

 

[05' Ditry Duramax]

I think the Edge w/ Attitude does it but have to clear the code before start up

 

[speedmetal6.6]

More Info

Can you give us some more info on the dpf-r simulator such as installation.p.s do you have any info on the xrt tuner such as a table of the levels of Hp and torque

 

[05' Ditry Duramax]

you lost me there. I don't know much about those things. I do know a guy who has put twins on his already and is getting ready to dyno it again. He just made 670ish on his last trip.

 

[Alligator]

Can you give us some more info on the dpf-r simulator such as installation.p.s do you have any info on the xrt tuner such as a table of the levels of Hp and torque

Here are installation instructions, pretty simple install http://www.dpf-r.com/docs/DM30.pdf

The tuner is new to me too, as I said in my first post. I will find out more about it tomorrow, and post up.

The Edge juice does work, but it just clears codes on start up, not turn off the DPF.

Chad