480 over stock lb7

SFLB7

New member
Feb 4, 2019
3
0
1
Worland,Wyoming
I have a 01 that I went through this winter. I put Carillo rods, delipped the pistons, Keyed the cam and crank, ported heads with Honeywell springs, head studs, billet injector hold downs with 65 over injectors and 10mm fleece stroker. I recently acquired 480 billet wheel and race housing. Is this a good combo to put this turbo over stock? I want a well behaved daily driver that will make around 700 or so but don’t want to sacrifice any turbo lag

Thanks
 

SFLB7

New member
Feb 4, 2019
3
0
1
Worland,Wyoming
I do have a built tranny-not all billet, but limitless diesel 1078 converter and clutches/valving. Also lift pump and Detroit truetrack in rear. Exhaust housing on 480 is 1.32 a/r