33x13.50

[need_a_dmax]

what will i need to clear these, would a 3 or 4 inch lift let me clear them

 

[madmatt]

I have a tuff country 6" lift lowered to 4" and clear 33X12.50s with ease.

now I've actually lowered the front just a hair more then it is in this pic.

 

[need_a_dmax]

man im lovin the cclb

 

[Linden]

the biggest impact involves the rim width and off set. i have 35x13.50 on 20x12 with -44 offset on an 8" spindle lift and i still had to do some cutting

 

[madmatt]

yeah I'm not sure what my offset is but they're still tucked in pretty well and the inside of my tire barely clears the UCAs up front. have considered a small spacer.

 

[madmatt]

man im lovin the cclb

and i should add my rear in that pic is squatted just a touch but really not much at all.

 

[Linden]

i think there is a member running 33x15.50 sx's try searching that i want to say he was leveled

 

[bullfrogjohnson]

I run 33x15.50's on a 4" lift

 

[Ryan T]

I ran an 18x9 with 33x12.50 toyo m/t with stock torsion height in the front and 3 in drop shackle in the rear and they didnt rub, i just had to trim the lower plastic on the front bumper...

 

[John Wayne]

33x13.50 dick cepek fc2 here. Cranked up to almost level(within half an inch). Mounted on 18x9 wheels with 4.5" bs. Just some trimming and no rubbing whatsoever.

 

[need_a_dmax]

33x13.50 dick cepek fc2 here. Cranked up to almost level(within half an inch). Mounted on 18x9 wheels with 4.5" bs. Just some trimming and no rubbing whatsoever.

any lift or stock height

 

[need_a_dmax]

Linden, i would just like to add i love ur pickup 01-02 bodystyle FTW

 

[Linden]

Thanks man

Sent from my EVO using Tapatalk

 

[John Wayne]

any lift or stock height

Only cranked up. Still have 3/4" between droop stop and upper control arm.