2020 Oil Cooler Retrofit Kits (01-19)

[Bdsankey]

I have created a prepackaged kit for 01-19 trucks to install the 20+ GM oil cooler. I am going to be retailing this kit at $450 to your door anywhere in the continental US. This kit will include every gasket, seal, component, 10.9 flanged hardware, thread locker, and o-ring lube to do the job.

Let me know if I can help get a kit coming to anyone!

This will include:
1) GM 2020+ oil cooler
2) GM 2020+ elbow
3) GM cooler to elbow seal
4) GM elbow to rear engine cover seal
5) GM water pump outlet to tube seal
6) GM water pump tube to oil cooler o-ring (pricey bastard)
7) AmsOil EAO17 oil filter (full synthetic media)
8) 2x M8-1.25x120mm bolts (cooler>block)
9) 3x M8-1.25x40mm bolts (cooler>block)
10) 5x M8-1.25x25mm bolts (3x for elbow>cooler and 2x for elbow>rear cover)

 

[5akman]

Decent price on a complete kit. I'll be in touch as soon as I get about 5 boxes of aftermarket goodies installed on my '06 first!

 

[Bdsankey]

Decent price on a complete kit. I'll be in touch as soon as I get about 5 boxes of aftermarket goodies installed on my '06 first!

Anytime! The hard to get items I ordered stock of to make 10 kits.

 

[Harshman]

I will get with you tomorrow about getting one.

 

[Bdsankey]

I will get with you tomorrow about getting one.

Let me know! I am waiting on the oil coolers to come in but should have them early next week. I've got 12 on order because....... well........ they tend to show up damaged from transit.

 

[pl_silverado]

Let me know when they are in stock.

 

[Bdsankey]

Let me know when they are in stock.

Coolers are on the way, everything else is already here. I have 9 left if you'd like to order one.

Coolers arrive Monday per UPS, kits are going out no later than Wednesday.

 

[pl_silverado]

Never mind. Scratch that. My engine builder already has one, and is further along than I expected.

 

[Bdsankey]

Never mind. Scratch that. My engine builder already has one, and is further along than I expected.

I didn't see this, my appologies!

Thank you to all who preordered, I've sent all 10 out and have ordered another 2 to keep in stock on the shelf!

O-ring lube and thread locker did not come in so single use packets were not included this go around. I'm working with a few companies to order "counter packs" (AKA what you see at the parts store counter) to make everyone's life easier.

 

[malibu795]

....

 

[68ss]

How do I go about getting one of these?

 

[Bdsankey]

How do I go about getting one of these?

I’ll shoot you a message!


Sent from my iPhone using Tapatalk

 

[Harshman]

Got my kit today, thank you. Now I need to get the engine together.

 

[Bdsankey]

Got my kit today, thank you. Now I need to get the engine together.

Glad it made it there safe and sound! The reason I cut open the oil cooler box itself was to verify the cooler did not get damaged. I've had far to many show up damaged. As of late, GM has gotten it together on these not being thrown off the back of a moving truck haha.