2014 EFILive Training classes by StarLite Diesel

zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Yes yes - i know... 2014 is too far away - NOT!

Just starting here to give everyone updates on the training classes, and what i have confirmed and where, as well as the 'outstanding' classes i'm still waiting on confirmations for. That way, you can start planning which one will work best for you, and know when to plan for it (at least have a good rough estimate for the ones that aren't finalized yet).

So here goes! Right now i'm just posting locations and dates, but will follow up this thread with details as soon as i get all the classes locked down 100%

Location - Date
Liberty Hills, TX - January 11-12th - CONFIRMED
Mira Loma, CA - TBD (Jan-Feb)
Salt Lake City, UT - TBD (Jan-Feb)
Rossville, GA - TBD (Jan-Feb)
Lima, OH - March 8-9th - CONFIRMED
Franklin, WI - March 22-23rd - CONFIRMED
Bangor, ME - April 12-13th - CONFIRMED
Bellingham, WA - TBD (May)

All of these locations are at shops or at trade schools / universities and will be of similar format to how the past classes were done. I do plan to change things up a bit based on requests from past students to hopefully make these classes that much better for everyone!

Thanks!

-->Zach
http://www.starlitediesel.com
 
TLyons90

TLyons90

New member
Apr 22, 2013
1,631
0
0
Greenville, SC
I was just looking into ordering your training books online that you give out in the classes, but now that I have seen this I just might have to plan on the Rossville, GA class!
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Right now Texas definitely has people banging at the door. I haven't set up the website for the classes yet, to start accepting payments. The classes are capped at 20 people each location. I'll be getting the website set up tonight or tomorrow with each individual class / details. Wanted to wait until i had all the classes finalized and was trying hard to have that done by today but looks like a couple of them still aren't going to have positive answers on their dates until next week.

So, in the mean time - if you guys want to keep looking here over the next day or so, you'll see the classes pop up so you can get your spots saved. Right now i think there's already 10 people waiting on my slow @$$ to get the details up on my site - but again, was trying to do all the work in one shot so i could get them set up all at the same time :D

Sounds like i'll be seeing a lot of people in the next few months.
 
SteveLBZ06

SteveLBZ06

New member
Jan 6, 2013
200
0
0
Central MA
Would i need a computer or a v2 or anything to bring to a class or do you supply everything needed? I'm interested in going to the bangor one
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
The cost will be $500 total for both days at every location, and will include the training books. I keep the cost set, because in the end across all the classes things work out in the wash. Some of these classes are going to be fairly expensive to get to (rental car, hotel, plane tickets, facility rentals, etc.) while others are not as expensive. It's just easier to keep the costs set regardless of the location.

In terms of what you 'need' for the class, I HIGHLY recommend that you have at least a laptop with EFILive installed. Perfect world is to have a V2 as well, however that isn't a requirement. I do not supply laptops at the class, however I do give dealer discounts to class participants on EFILive products should you want to purchase anything.

Other than that - I will have all confirmed classes listed/available for sign up on our website tomorrow. There are only 2 remaining classes that i don't have confirmed dates for yet. The newest confirmed class is the Salt Lake City class confirmed for January 25-26th at Industrial Injection.
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Ok -the confirmed classes are now posted on our website and available for sign ups! There are 3 classes still not confirmed with dates yet, but I do believe we'll get that handled early next week. To reiterate the list:

Location - Date
Liberty Hills, TX - January 11-12th - CONFIRMED @ Hamilton Cams
Mira Loma, CA - TBD (Feb) - Westech Performance
Salt Lake City, UT - January 25-26th - CONFIRMED @ Industrial Injection
Rossville, GA - TBD (Feb) - No Limit Tuning & Design
Lima, OH - March 8-9th - CONFIRMED @ University of NW Ohio
Franklin, WI - March 22-23rd - CONFIRMED @ Hucksdorf Diesel
Bangor, ME - April 12-13th - CONFIRMED @ Diesel Fuel Systems
Bellingham, WA - TBD (May) - DK Diesel

The sign ups and details for each currently confirmed class can be found by clicking >>HERE<<. If you have any problems signing up, please shoot us an email.

Thanks again for the support for these classes!

-->Zach
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Yep. Bellingham won't be until somewhere in May though - and the Rossville, GA class I'm hoping for end of February but still waiting to confirm that date and the California date. The one in California doesn't seem to have much interest though so maybe I'll take a couple weekends in a row off! :woott:
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Rossville, GA

Ok, the Rossville, Georgia class is confirmed! It will be held at No limit Tuning & Design on February 22-23rd.

To register for any of the training classes or find out more about them, click here

As always, let me know if you have any questions!
 
You must log in or register to reply here.
Top Bottom