1st gear delete

[dracing70]

well i built a tranny tune to delete 1st gear and i tried it last night and it did not work. my truck still started in first. i even went as far as setting every one to two shift to 0 just to make sure i had all areas covered but it still started in first . what am i doin wrong . i am in four low tow haul and selector in third. and i want to start in second

 

[RPM Motorsports]

It's probably better it does not work, unless you can afford a few converters! I went through two 1057's, only trying it twice.

 

[hondarider552]

Why do you want to do a secdond gear launch?
As Russ said, it hurts your converter quite a bit...

 

[Kat]

Why do you want to do a secdond gear launch?
As Russ said, it hurts your converter quite a bit...

For sled pulling.

I must be lucky Wendy so far has been fine :cool2:

 

[paint94979]

For sled pulling.

I must be lucky Wendy so far has been fine :cool2:

It must be those Witch Spells huh Kat?

 

[paint94979]

It's probably better it does not work, unless you can afford a few converters! I went through two 1057's, only trying it twice.

Russ after talking to Mike he told me the 1057 does not like to stay staged for a long time. IIRC you are fully staged before you bump the 2nd set of yellows right? Since i don't care about cutting lights i stage after the green light comes up def. keeps things cooler that way.

 

[ripmf666]

So is this for you or one of your customers ? If so you should answer the ? below,and atleast the guy's helping you know that you are making money from there help.

From a post you never answered before.I made it bold for you.

quick queston need a quick answer i know lbz cant utilize lbz however can a 06 lly use them? or is it the same as lbz

Not bashing you or anything, But why are you asking all this if you are tuning other peoples trucks for money?

Quote from another post you have.

there are two kinds of people that need more than one tune. people with a stock tranny and people that dont own the v2 but still have their vehicle tuned with efi. some of my customers live far away and its difficult to expect them to drive all that way to tune over and over

 

[RPM Motorsports]

Russ after talking to Mike he told me the 1057 does not like to stay staged for a long time. IIRC you are fully staged before you bump the 2nd set of yellows right? Since i don't care about cutting lights i stage after the green light comes up def. keeps things cooler that way.

Im sure that does not help. I am fully staged before I bump the 2nd light, and leave pretty hard!

 

[dracing70]

first of all what i do is my business yes i tune vehicles what is it to you and no this is for me i dont know everything i am still learning and i doubt you do either d___ so mind your own this question is for my truck for sled pulling last i knew one of the main reasons for this site was to provide assistance.

 

[paint94979]

first of all what i do is my business yes i tune vehicles what is it to you and no this is for me i dont know everything i am still learning and i doubt you do either d___ so mind your own this question is for my truck for sled pulling

wow dude relax... you honestly feel confident tuning vehicles when it appears you lack even basic vital information?

 

[Brayden]

I guess I should quit launching in 3rd :rofl:

 

[Turbo Buick 6]

There are many members here that are very willing to help people for free, but are not very keen on others making money off of their work. I am very willing to give advice to people building their own parts but you will rarely find me giving advice to people that are building parts for others for money. If someone is charging for their work shouldn't they be the one answering questions.....not asking them?

 

[ripmf666]

first of all what i do is my business yes i tune vehicles what is it to you and no this is for me i dont know everything i am still learning and i doubt you do either d___ so mind your own this question is for my truck for sled pulling last i knew one of the main reasons for this site was to provide assistance.

Well it is my business in a since, I am to mod the site.You have stated in the past that you have customers.And it would not be right for other supporting vendors to get there toe stepped on.Also I do not make money from tuning so no i do not know how to tune,says it nice and big in my header EFI LIVE STUPID, The post that I quoted you in you were wanting info to help your paying customers, so you should let the guys that help you here know that you might make some money from what they share with you.Also if you want you can take this to PM land you do not need to get cocky, I am a very laid back mod here.If not there is always time off land.

Thank You

there are two kinds of people that need more than one tune. people with a stock tranny and people that dont own the v2 but still have their vehicle tuned with efi. some of my customers live far away and its difficult to expect them to drive all that way to tune over and over

 

[hondarider552]

Sounds like he doesnt want any help....

 

[dracing70]

even the best tuners ask questions if you dont want to give any info dont go back and keep surfin forums 95 percent of the questions i have are for myself and my truck as i said i am still learning everyday. so next time you have a a dumb a__ question ask me in person when i am around at the pulls if you are local and if you r not lucky for you and by the way the question you are refering to was not for any customers it was a general question i merely made the comment and statement about what the customers i have like and prefer it was not a tuning question about any one of there vehicles

 

[Jasondt2001]

even the best tuners ask questions if you dont want to give any info dont go back and keep surfin forums 95 percent of the questions i have are for myself and my truck as i said i am still learning everyday. so next time you have a a dumb a__ question ask me in person when i am around at the pulls if you are local and if you r not lucky for you

FINALLY!!!!!!!!!! I get to use it!!!! I've been waiting for some dumbass to unleash this on :rofl:

Grow up tough guy - you're just pissed you were rightly called out!

 

[dracing70]

good one you got me oh wait no not really

 

[ripmf666]

For a fact I am kinda local for you if your around the Buck motorsports pulls, I'm about 40 mins from there in Md, Not sure you should make threats over the interweb,I have been very nice in asking the question,But you still came back being a smart ass.By the way you can not miss me 6'1 480lbs at the events.Have fun.

 

[JoshH]

There are many members here that are very willing to help people for free, but are not very keen on others making money off of their work. I am very willing to give advice to people building their own parts but you will rarely find me giving advice to people that are building parts for others for money. If someone is charging for their work shouldn't they be the one answering questions.....not asking them?

I could not agree more.

 

[hondarider552]

good one you got me oh wait no not really

Yeah he got you, stop drinking wine.