will I be able to drag the 1/8th mile with a stock trans with a transgo kit . and if so with my mods in my sig what will I be running ( just a guess ).
1/8th mile
- Thread starter AdaMax
- Start date
Yes you will be able to run the 1/8th, you can even run the 1/4. The real questin is will your trans survive...
Without knowing what HP your running, weight of the truck, etc its really hard to tell if your trans will survive.
So with all the mods done, why are you still on a stock trans?
Without knowing what HP your running, weight of the truck, etc its really hard to tell if your trans will survive.
So with all the mods done, why are you still on a stock trans?
i just use this thing in stock form and for sled pulling . The torque converter is a little low stall being stock but other than that it seems to put the power to the ground pretty well ( for a stocker ) . It gets virtually no abuse on the street . I was just wondering cause they are having flashlight drags at the airport a couple hundred yards from my driveway . and yes the trans and an industrial cp3 (I think mine is getting weak ) are my next purchases on this unit .