lbz

  1. Dirtymaxrandy

    Help!!! 06 lly/lbz Allison 1000 6 speed clunking

    hello, I have a 2006 Chevy Duramax crew cab dually 4x4 Truck intermittently has slight difficulty coming out and going in to gears P,R,N,D, and coming in and out of park With a loud clunk harsh feeling as if it is loaded or parked on a hill once in any gear runs perfect, doesn’t skip a beat and...
    • Dirtymaxrandy
    • Thread
    • allison allison 1000 six speed allison transmission duramax lbz loud clunk shifting hard transmission issue transmission problem
    • Replies: 0
    • Forum: Mike L's Trans Talk
  2. S

    Injector 6 and 7 issue. Lbz

    On start up truck runs smooth, after you drive it around it shakes at idle. Has p0207 for injector 7. New fuel filter New injector 7 pigtail. (Previous pigtail looked to have been cut and reattached but not replaced) Balance rates show 6 and 7 at 12. Rest are within 4+- Seems to happen once...
    • Sethdavis09
    • Thread
    • injector problems lbz p0207 rough idle shaking
    • Replies: 1
    • Forum: LBZ
  3. D

    Rebuilding LBZ engine

    A tale as old as time, I cracked a piston in my LBZ (#4) I got it pulled, tore down, and my block, heads, and crank sent to the machine shop. I was dyno tuned at 510hp and 1,169tq all on stock internals. Wasn’t always on Tune 5 but lasted significantly longer than expected. My original plan for...
  4. CrankyDiesel

    LB7 to LBZ true Swap

    This might be a little long so bare with me. I just bought a 06 LBZ CCSB, non running from the information I've gathered its a 06 body on a 02 frame. "Previous owner" had a LB7 in it. he swapped the 06 Dash out with a 01-02 to make the old LB7 motor work. So with all the Engine, Transmission...
  5. B

    2006 LBZ Duramax thump from airbox

    Hello everyone I am new to the forums I hope im in the right section recently purchased a 2006 GMC Sierra 2500hd crew cab long bed with 256k miles and the truck is rust free. I purchased the truck for a good price due to a problem that it has. The truck runs and drives great but im hearing a...
  6. T

    Getting 12v at duramax fuse block, but 3v on Avalanche body.

    Well, title says it all pretty much. I'm still trying to figure out my 2012 Avalanche/duramax swap. Finally got everything sorted out wired up, and even put power to it. This was last Friday, and it was great, lights on the dash came on, all the interior lights, and everything seemed to be...
  7. marrolox

    LBZ - Rescaling MAP Sensor in EFI Live

    In the middle of "adjusting" an LBZ truck with a larger VGT for sled pulling. The log files show the MAP sensor is maxing out at 39.01psi (NOT including barometer pressure). I was talking to the owner and we were thinking of installing a 5 bar MAP sensor, 0-5V, adapted so it could be read...
  8. T

    What to do with extra High Speed GmLAN lines

    Yeah me again, with electrical. Again :| So I'm almost done my LBZ to 2012 Avalanche transplant, but I've run into yet another problem. so the J1939 lines for LBZ are all self contained in the engine harness and only go between the ECM TCM and GCM. @kidturbo gave me some insight on how to use...
  9. T

    Gauge DIC from 2012 Dmax with 08 ECM compatibility?

    Hey Guys, to preface I'm swapping an avalanche body-on-frame not transplanting. so far everything has lined up, and I was able to sort out my engine CANBUS problems with great help from @kidturbo, and @duratothemax. I have an 06 LBZ running on an LMM computer using GMLAN to communicate with a...
  10. churamax

    Need Factory or low power LBZ tune!!!

    Hey guys and gals, I've done an LBZ swap into an 80 series Landcruiser over here in New Zealand. I am trying to get it going with EFI live but I'm having issues getting any tunes. The ecm came with an efi live tune that I couldn't modify so I'm trying to find a safe tune to get the thing...
  11. P

    ROTIDE

    Hey everybody…..I have lurked for quite some time. Decided to sign up cause I am going to try my hand at tuning (I will apologize now for those questions….lol). I’m a Tennessee boy borned and bred…. middle Tennessee north of Nashville. Spent six years in the Navy. Spent time turning wrenches...
  12. 715Hunter

    Piston rings not seating

    Completey new here, just been reading posts as a non-member for a long time. Anyone have experience or advice on how to get rings to seat? Really, really don't want to pull my engine back out and have the bores re-honed. I just finished re-installing the engine in my truck. It cracked a piston...
  13. W

    Laggy 65mm Turbo

    I have an LBZ that I am struggling to get clean, decent driveability with. It has a 65mm wold fab turbo on it. Does anyone have any experience with this specific turbo? I've checked for boost leaks and don't have any, is it possible to have an exhaust leak that I can't hear? I haven't looked too...
  14. T

    Serial switching LBZ

    Does anyone know of or if the new edge CTS3 can serial switch a LBZ duramax? I wanted to use a CTS3 to control EFI live tunes on my duramax but doing some reading on old threads from years ago it seemed like it was not an option on older CTS systems but I was wondering if that was solved with...
  15. B

    Best PreBuilt Transmission Brands

    Hello guys, I have a 2006 LBZ Drama and the stock trans is starting to slip some so I am finally ready to pull the trigger on a built transmission. I would like a prebuilt one (have a completed one shipping to me and send my core back). What Brands do you recommend, what would be the best...
  16. G

    2007 LBZ Allison Won't Shift

    Hello folks. I have a 2007 LBZ with 200K. All stock except Banks full exhaust and intake. Looking for some info here to get me going in the right direction. It popped a check engine light just before making a four hour trip from one property to another late Friday evening. Drove it about 4...
    • GoHusaberg
    • Thread
    • allison 1000 six speed lbz low transmission temp shift solenoid stuck in second gear won't shift
    • Replies: 15
    • Forum: Mike L's Trans Talk
  17. fajitatone

    Driveline vibration while taking off.

    So we did our first trip in 3 years, and I noticed that when pulling from a stop till the 2nd gear shift, there seems to be a shaking or vibration from the driveline. I never noticed it before this trip. I haven't done much to the truck besides a set of Fleece trans cooler lines (temps never hit...
    • fajitatone
    • Thread
    • 5th wheel crew cab lbz long bed towing
    • Replies: 4
    • Forum: Towing
  18. B

    2008 lmm tuning questions

    So I sold my 06 lbz got this lmm lift pump,4” deleted exhaust, dsp5, and a v2 autocal Idaho rob all this was done when I bought it thing is no position on the dsp5 feels any different?. Gas mpg sucks only 15mpg truck has a 6” rcd lift on 35s btw any idea if the tunes even are loaded?.
  19. L

    Complete parts list for Long block Rebuild

    Hey guys! Sorry I’m very new here but I wanted to get a list of all parts needed for complete long block. Truck is a 2006 CCSB LBZ Duramax with 234K. I cracked a piston and had some scoring on cylinder walls but was able to find another LBZ block with 80K miles for $800. Block is naked but...
    • LBZLaRoche
    • Thread
    • lbz rebuild
    • Replies: 0
    • Forum: LBZ
  20. kelso06

    Full coolant and oil way to full

    Hey guys. new to forum but definitely used and its help me out alot in the past. But i got a 06 lbz 245k on it, stock fuel. Efi live, 5 inch exhaust and a danville 3794. Anyways, its been a daily driver but i started driving my lb7 so the lbz was parked for like 9 days and i went to take it on a...
    • kelso06
    • Thread
    • coolant to full fuel in oil headgaskets lbz oil in coolant oil to full
    • Replies: 0
    • Forum: LBZ
Top Bottom