injectors

  1. R

    Towing injector size

    Hey guys I've got a 03 6.6l lb7 with some injector issues. I've got 3 going out and am going to just do all of them while I'm in there. The pickup has a spade Tuner with an edge cts2 monitor for my guages, 4 inch straight pipe, and modified ppe valve. I'm looking to go bigger on injectors for...
    • Reese99
    • Thread
    • injectors towing tuning
    • Replies: 18
    • Forum: LB7
  2. LB7_01DURAMAX

    Injector problem

    I put some reman 30% over injectors in my truck from Lincoln diesel in 2015, since then I have only put 30k on the truck. Religiously changed fuel filters and ran hot shots secret additive. I got truck out a couple weeks ago and changed oil and has fuel in oil. So I pulled valve covers and ran...
    • LB7_01DURAMAX
    • Thread
    • injectors lb7 lincolndiesel
    • Replies: 12
    • Forum: LB7
  3. D

    Injector Replacement Best Practices

    Hey Guys- What are best practices for replacing injectors while working on these LML’s or other common rail trucks? I’m going to pull injectors on my 15 LML and wondering if anyone has any advice they would like to share. Seems like the biggest thing is keeping stuff clean clean clean (don’t...
    • Dustin_360
    • Thread
    • best practices injectors
    • Replies: 6
    • Forum: LML
  4. A

    Longer than usual cranking time

    I have a 2006 Chevrolet duramax LBZ 200,000 miles. I only drive the truck about once a week. And for the last few weeks, it takes longer than usual to fire up. I’ll turn the key and let the glow plugs warm for about 5-10 seconds. When I try cranking, it will turn over for a solid 5 seconds or so...
    • Am97
    • Thread
    • cranking issue duramax fuel filter fuel problems injector problems injectors lbz long cranking
    • Replies: 3
    • Forum: LBZ
  5. wyattearp92

    Anybody in utah!!

    I need to have all 8 injectors replaced in my 2001 LB7 with no mods other than exhaust/intake. Anybody recommend a certain shop?
  6. B

    LBZ: Injector question

    I have a 2006 LBZ which started smoking under a load. pulled the injectors sent them off to dinomite desiel they bench tested them and found the ball seats to be bad. Now I have the issue of trying to find injectors for the truck with the shortage going on with parts from bosh. The dealer wants...
  7. S

    Will new nozzles correct balance rates?

    I have a knocking sound at about 1500 RPM's. I pulled the Balance rates and I have 2 injectors that are over +-4 (neutral brake applied) one is 4.44 the other is -4.8 (sometimes spikes to -6) and there are two that are pretty close. +3.8 and +3.53. Will replacing the nozzles with some like...
Top Bottom