Search results

  1. 02ilduramax

    coolant leak

    my first thought was the head gaskets as well but the cooling system was not building any pressure when crawling under the vehicle i noticed what looked like stains on the bell housing but im assuming that was from the heater core hoses leaking i will see if i can plug the coolant lines to the...
  2. 02ilduramax

    coolant leak

    is it common for the turbo to leak coolant? i had a truck dropped off and was diagnosing it for coolant loss i put a pressure tester on it today and started pumping it up and noticed it leaking from the heater core connectors, fixed that and took it for a test drive and got back and the inside...
  3. 02ilduramax

    duramax in s10

    unfortunately I haven't been able to work on the truck as much as id like and definetly have not posted progress but today just be fore I left for work UPS showed up with a shiny spinny thing its the 5 blade s485 from stainless diesel
  4. 02ilduramax

    Lb7 radiator

    Has anyone used the direct replacement radiator from xdp https://www.xtremediesel.com/xdp-x-tra-cool-direct-fit-replacement-radiator-xd295 I noticed some coolant in the snow under my truck on the passenger side I checked the petcock and it seems to be tight so I was looking at purchasing one...
  5. 02ilduramax

    Stainless diesel s485

    wondering if there are many people running the stainless diesel s485 5 blade I am looking at running this turbo just looking for people that have ran this turbo and what its hp potential is I would like to stay with a single turbo and be in the 1200+hp range don't to worried on driveability as...
  6. 02ilduramax

    beadlock question

    thank you but im running a ford 9in rear end with 5-4.75 bolt pattern
  7. 02ilduramax

    beadlock question

    is there 2wd trucks running slicks if so are you using beadlocks, single or double looking for info. im in the market for rims for my repower that will be drag race only and wondering if anyone that hasn't ran bead locks has had issues with the rim spinning in the tire, or if I will be alright...
  8. 02ilduramax

    LB7 electrical gremlins

    each battery was load tested separately and I will check on those 2 grounds and see what I come up with and check back
  9. 02ilduramax

    LB7 electrical gremlins

    batteries are a few years old but both checked out good on 2 different load testers I will look in to grounds this weekend
  10. 02ilduramax

    LB7 electrical gremlins

    ive been having some electrical issues on my 2002 lb7 and im stumped and not sure where to start first thing that happens is my gauge cluster will not work unless something is plugged in to the OBD2 port currently I am using a cheapo code reader and leave it plugged in once unplugged I have no...
  11. 02ilduramax

    I have an s 366 turbo if your still interested in a go fast parts also have a 475 I would part wtih

    I have an s 366 turbo if your still interested in a go fast parts also have a 475 I would part wtih
  12. 02ilduramax

    are these valves still available?

    are these valves still available?
  13. 02ilduramax

    LB7: 1200HP build

    stock ported heads single turbo s480 or bigger want to be 1200 on fuel only
  14. 02ilduramax

    LB7: 1200HP build

    looking for suggestions of what all is recommended in a 1200hp build as far as internals go I have carrillo rods already and the block is .020 over truck will be drag race only possibly nitrous occasionally
  15. 02ilduramax

    LB7: Bigger valves?

    who was selling them? they were not very much bigger didn't know if anyone had run them or had any expirience
  16. 02ilduramax

    LB7: Bigger valves?

    I seen a while back I thought someone was making bigger intake and exhaust valves for our trucks I was just curious who is running them and has there been any benefit from them in a full race set up aftermarket heads are out of the question as of right now
  17. 02ilduramax

    LB7: rpm gauge

    does anyone have a schematic for the gauge cluster for a 2002? might check that first.
  18. 02ilduramax

    LB7: rpm gauge

    I recently rebuilt my first Duramax engine thanks to the knowledge from everyone here. I got the truck running today it starts great and seems to run fine but I seem to be having an issue with the Rpm gauge one it is started the gauge doesn't move at all if I tap the throttle the gauge will jump...
  19. 02ilduramax

    LB7: What pistons

    I have carrillo rods already was hoping to stick with those
  20. 02ilduramax

    LB7: What pistons

    currently looking to purchase some pistons for my Duramax s10 will be race only 1200+hp undecieded on nitrous as of right now what is the best option out there right now ...im sure I will get a million different answers but would like to hear what will be my best option