Search results
-
LB7: Lopey Idle - P0193 Code
Not completely done with this yet. I was tidying up things today and while wrapping the pressure sensor wires back up with loom from inspecting last night, one of the wires pulled out. It came out pretty easily too so I'm not surprised if it was making a bad connection before inside the...- AgLiftPilot
- Post #7
- Forum: LB7
-
LB7: Lopey Idle - P0193 Code
That is what's up. After you posted that test I spent a couple hours with a multimeter probing the pins and running through things. Finally got down to using a 3 amp fused jumper which tested good so that left a faulty connector or sensor. Decided to try plugging it in to see if all the poking...- AgLiftPilot
- Post #5
- Forum: LB7
-
LB7: Lopey Idle - P0193 Code
I've tried the FPR both plugged and un plugged, made no difference. Same with the pressure sensor.- AgLiftPilot
- Post #3
- Forum: LB7
-
LB7: Lopey Idle - P0193 Code
Just got done installing new injectors and a FASS lift pump. Now I have an extremely lopey Idle and a P0193 code. I've traced wires, plugged and unplugged connections, checked for bent pins, and found nothing that appears wrong. The FPR is a brand new Bosch LB7 Fuel Pressure Regulator that I...- AgLiftPilot
- Thread
- Replies: 7
- Forum: LB7
-
Fall 45% sac lb7 injector sale!
Ill be running mine off an Edge tuner initially unless that doesn't work well. I have a new fuel pressure regulator that I can install while everything is apart. With these injectors, would it be worthwhile to source the newer ?LLY? FPR or stick with the LB7 FPR? I might tune it down the road...- AgLiftPilot
- Post #8
- Forum: LB7
-
Fall 45% sac lb7 injector sale!
A set of these just got installed on my LB7 last night! LDS was awesome to work with! :thumb: Gotta finish the install up this evening but everything came perfectly packaged and I was glad I got the high pressure lines because every single one of my had extreme corrosion on the injector side of...- AgLiftPilot
- Post #2
- Forum: LB7