Search results

Search the forum Search Articles
  1. Jesse2006duramax

    DTC p0732

    The definitely are a joke, that's why I used an allison manual right alongside it, I mainly just used the suncoast instructions for clearances. I also put everything new in but the solenoids, so all new bearings seals pump wiring harness all of it. Isnt Evan's kit a suncoast kit?
  2. Jesse2006duramax

    DTC p0732

    Was wishfully hoping there was something less complex wrong with it but looking like I will have to
  3. Jesse2006duramax

    DTC p0732

    This was my first, built it following an allison manual alongside the suncoast manual and the suncoast clearances. I've been running it a little over a year put about 20k miles on it.
  4. Jesse2006duramax

    DTC p0732

    Friday I got 420s on my truck, last night I went to do a 4wd boosted launch. Built up in 2nd gear to 20psi and turned loose. Hit the manual lockup and the truck hesitated like it was slipping or couldn't figure out what to do for a second, then wrapped out to redline in 2nd. Threw it in limp and...
  5. Jesse2006duramax

    L5P L5P Tuning

    My company truck I drive is a 17 f350, i dont like the looks of the exterior and half the time it acts like it doesn't want to start but the cab space is amazing, I'm 6'1" and with the seat all the way back and the seat leaned back tot he back window I can't touch the steering wheel without...
  6. Jesse2006duramax

    Injector balance/ rattle issues

    At idle when in drive and your foot on the brake or the parking brake set. I cant tell if it is doing it for sure or not while cruising but when you roll Into it is is quiet and doesn't rattle, I had a rattle with the stock ones when I would get on it before the turbo lit, not with these. It...
  7. Jesse2006duramax

    Injector balance/ rattle issues

    What about having some rattle to them? This is my first time around big injectors
  8. Jesse2006duramax

    Injector balance/ rattle issues

    I am unable to load pictures for some reason, they must be too big so I'll type them in In park, Inj.1_5.7 Inj.2_3.3 Inj.3_-1.2 Inj.4_0.1 Inj.5_3.0 Inj.6_-3.7 Inj.7_-4.0 Inj.8_-3.2 In drive Inj.1_1.9 Inj.2_1.6 Inj.3_-1.2 Inj.4_1.8 Inj.5_0.1 Inj.6_-1.2 Inj.7_-1.9 Inj.8_-1.2...
  9. Jesse2006duramax

    Injector balance/ rattle issues

    I got some s&s 150% over injectors and installed in my truck, they were used with 2k miles on them and I saw before they were pulled that the balance rates were all within 2.0 to -2.0 and I picked them up immediately after they were pulled. They sat in my house for about 6 weeks before I just...
  10. Jesse2006duramax

    Cp3 failing??

    Okay thank you
  11. Jesse2006duramax

    Cp3 failing??

    How do I go about doing so? And truck only has 120k miles, but it has been pretty rough on the stock fuel with the larger turbo on it
  12. Jesse2006duramax

    Cp3 failing??

    Oh really? I guess leaking by into the return?
  13. Jesse2006duramax

    Cp3 failing??

    I have an 06 lbz stock fuel, within the past few months I began to notice at half throttle the fuel rail pressure would bounce. WOT it smoothed out and fueled fine, sent my tuner a data log and they sent new tunes to try to work it out and that didn't fix it. Now it's started to lose rail...
  14. Jesse2006duramax

    What's needed for good build??

    Lol time does fly by and go past in the blink of an eye. I have been looking into them and may consider it yet, I'm going to see how things go with this block first and go from there
  15. Jesse2006duramax

    What's needed for good build??

    I need to update that, the trans is built to hold well more than 800 and has a goerend "R" torque converter. Not sure but will probably do twins and as far as cost goes, I'm not worried and want to do it good and will put the money into it, it's not something I plan on having done in a couple months
  16. Jesse2006duramax

    What's needed for good build??

    Hey all, looking to getting some bigger injectors soon and probably a cp3 as well, this weekend I'm going to pick up a short block lbz motor with the plans to build that and drop in my truck, my question is what is the best parts to buy to build it to hold 800ish the best, I know roughly what I...
  17. Jesse2006duramax

    Pillar gauge mount help

    There's nothing wrong with it besides I have a mechanical boost gauge and the factory pillar and the auto meter mount likes to pinch the tube when it's mounted up fully
  18. Jesse2006duramax

    Pillar gauge mount help

    So I have an Auto meter pillar gauge pod on my lbz and it mounts over the factory A-pillar plastic. I was wondering if there were any for the classic body style that replaced the factory plastic piece instead of just sliding over it. I know there are some for the newer body styles and other...
  19. Jesse2006duramax

    2006 Chevrolet 2500hd silverado

    Jesse2006duramax submitted a new Showcase Item: 2006 Chevrolet 2500hd silverado Read more about this showcase item here...
  20. 2006 Chevrolet 2500hd silverado

    2006 Chevrolet 2500hd silverado

    2006 Chevrolet 2500hd silverado
Top Bottom