Search results
-
LB7: MAP/Boost pressure
So with the baro sensor disconnected and boat sensor connected it reads 17.7 psi, but with baro connected and boost disconnected it goes to 7.4 psi. And with both disconnected it read 7.4 still. Any ideas? -
LB7: MAP/Boost pressure
Ok so here is the live reading from my tool with the banks completely out of the equation. Engine off ignition on Live Data Numbers of DTCs 0 Calculated Load Value(%)0.0 Engine Coolant Temperature(¡£F)181 Intake Manifold Absolute Pressure(psi)17.7 Engine RPM(rpm) 0 Vehicle Speed... -
LB7: MAP/Boost pressure
The alternator is in the front passenger side of the engine. The boost sensor is behind there a bit behind the intake, and I have the harness running over the intake horn since I replaced that, so I basically runs almost directly to the wire coupling. But hopefully this weekend I'll be able to... -
LB7: MAP/Boost pressure
The Baro sensor is still stock and I got the proper boost sensor (MAP sensor) from the dealer themselves $:mad:$. And when I took it to the shop (prior to me even going to the dealer) to fix it they kept assuming bad sensor and ended up changing it a couple time to no avail as it kept the same... -
LB7: MAP/Boost pressure
Sorry was busy all weekend. I will do that and post what it reads when I get a chance to. Working night shift makes it difficult to accomplish much during the week unfortunately. -
Best Bourbon or Whiskey
Knob Creek and Gentleman Jack are my 2 favorites. :alc:- rupertalf
- Post #149
- Forum: Liquor Cabinet
-
LB7: MAP/Boost pressure
So here's some back story, I went to install a batmowheel into my stock turbo. Basically the turbo bearings and everything were shot and the compressor and turbine wheels were hitting the housing. Lucky me I got to get a new turbo. So now days later the new turbo is in and everything is put...