Search results

Search the forum Search Articles
  1. S

    LBZ: P0090 That will not Clear

    This is what it looked like when I cut the tape open. Notice the brown/ tan twisted wires. The brown wire is rubbed through.
  2. S

    LBZ: P0090 That will not Clear

    Here are a couple photos so you can see just how small of an area can screw you up. The first pic here is what I found when I flipped the harness over that was up against the drivers side inner fender well.
  3. S

    LBZ: P0090 That will not Clear

    Here to update... The new FPR did nothing but show me exactly how to install one. Maybe give me the piece of mind that it is new... My first clue was the water temp. Sweeping and the truck surging basically in unison. If you are having multiple electrical issues, than look for an electrical...
  4. S

    LBZ: P0090 That will not Clear

    The new FPR arrived. It Ohms out at 2.8 Seems like more of a short. I guess it really depends on how the ECM controls it. When I get it installed I'll post the results..
  5. S

    LBZ: P0090 That will not Clear

    Went back to it this evening. Pulled the pipe out, not too bad. I just didn't want to force anything and have to buy more parts than needed. BobbyB Thanks for the tip. I ended up having a short T25 bit and used a magnetized drill adapter (helped hold the screws also) and 1/4 socket on a 1/4...
  6. S

    LBZ: P0090 That will not Clear

    As bad as that sounds, Awesome... I hope that's it. Thanks for your help. Can someone tell me if the pipe that moves in the Y bridge comes out or do you just remove the bridge itself?
  7. S

    LBZ: P0090 That will not Clear

    Parked the truck where it can sit and started pulling it down. I found the harness you were talking about. It's a little odd. I have 3 wires in, 2 out? I'm assuming a possible diode back for a sensor. Either way, none of the wires in the jumper harness are shorted to each other. I checked the...
  8. S

    LBZ: P0090 That will not Clear

    It may just be, the people that have dealt with this issue are busy enjoying their repair ;) At least I'd like to think so. I have a new FPR on its way. Hopefully will be here Friday. If it fixes my issue, I'll be sure to post it. Would surely have made my search for answers easier.
  9. S

    LBZ: P0090 That will not Clear

    Bump. Just looking for someone that has had FPR issues. Anything close?
  10. S

    LBZ: P0090 That will not Clear

    Ok guys, been searching for 2 days. I seem to find a lot of dead end threads. I can't believe these past problems weren't fixed. I'm sure they found their issues and just not updated. I have an 06 LBZ. Airdog II 165. PCV reroute. Dsp5- Idaho Rob. EGR delete. 4" through a muffler. Everything...
  11. S

    New Mike L Trans Kit

    Right there with you. I'd really like to fix it before it broke.
  12. S

    what do you think? high 13's possible?

    I understand exactly where Quinton is coming from. No 2 engines tune the same. Rob has to make a "canned" tune to work with all trucks and stay "safe" there is always more left. Some more than others. Quinton is just pushing a little further. Works well on his truck. May "pop" the next motor his...
Top Bottom