Search results

Search the forum Search Articles
  1. H

    While I'm Making CP3 Controllers..

    Can i get a pm on price also. Thanks Heath
  2. H

    Nissan Duramax

    Not changing to a blower. I just had it sitting on the shelf so I took some pictures for a comparison. I like turbos
  3. H

    Nissan Duramax

  4. H

    LMM: 2008 gmc

    p0708 fix with a new TCM The TCM went bad, replaced and all good now. But it would only go bad when the transmission temp got above 140, anything below that is was running fine. Cheers Heath
  5. H

    LBZ: What emission standard do they comply with

    no mate i have 4 sitting here at the moment.
  6. H

    LBZ: What emission standard do they comply with

    Hey Everyone, Just wondering what the LBZ 06-07 Duramax Engine emission standard that it complied with. Anyone know where i could find this info. I need a printable copy for a Vehicle engineer here in Australia. Thanks Heath
  7. H

    LMM: 2008 gmc

    No it's not coming out the breather on top. It is the spin on filter. Just changed it and topped up the fluid but still the same result. P0708 and limp mode. Any other ideas people? Should I pull the pan and vb for a look? Thanks Heath
  8. H

    LMM: 2008 gmc

    Just rescued at friends truck, getting a p0708. p0700 There is a large amount of tranny fluid on the tranfercase, and bottom of tranny pan and spin on filter. Could the spin on be loose and lost enough fluid for this to set it off. I have not had much of a look yet, just thought i would...
  9. H

    Gm mdi module vs tech 2

    Hey everyone, I need to purchase tech 2, but i stubbled across these gm MDI modules. I was wondering if these do everything a tech 2 can do but are more up to date. I need the tech 2 mainly for transmission fault finding and putting the allison into the fast learn after rebuilding the...
  10. H

    Gmax 6 hard reverse?

    Dont stress Bryan, I am looking at buying one. Feel free to chip in some money if you like. haha I done your with efilive, but as mikeL said not the best. Is it still shifting Funny? Cheers Heath
  11. H

    Nissan Duramax

    Thanks guys, Here is the exhaust i just finished off. More pictures Not finished off yet, not sure how i am going to leave the cut on the stack.
  12. H

    Nissan Duramax

    More pictures
  13. H

    Nissan Duramax

    I got the Airdogs from the Australian Distributor, SIA Merredin in Western Australia. Thanks everyone. Cheers Heath
  14. H

    Nissan Duramax

    Some more pictures, see how far back it now sits Exhaust 5" off turbo into 6" S/S with v-band clamps
  15. H

    Nissan Duramax

  16. H

    Nissan Duramax

    Yeah Water/Air. The blue hose is the water inlet and outlets. Its an offset 4 tanks system, water enters the coolers from the center and exits out the front and back to give even cooling thru out the cooler. When it was designed and computer modelled. It was decide that the cooler would be to...
  17. H

    Nissan Duramax

  18. H

    Nitrous Express Duramax Dragster

    http://www.nitrousexpress.com/nxdragster.php Anymore info about this thing? Just stumbled across it? Cheers Heath
  19. H

    Project race truck

    Hey mika, what water/air cores are you using? I am building one at the moment very similar, under nissan duramax. Last page for some pictures. Love your trucks, and this thing is amazing. Cheers Heath
  20. H

    Nissan Duramax

    New intercooler pictures NEW UPDATED PICTURES
Top Bottom