Search results

Search the forum Search Articles
  1. MAXLLY

    Converter number 4 down the drain

    great news you are back on the raod! Sorry to hear of the converter loss:mad:
  2. MAXLLY

    guages in the cowl, 2 5/8" guages

    Yes on Autometer, they have 2 1/16" and 2 5/8" and MONSTER stuff. I could not find all the gauges i mentioned previously in matching faces or numerical values i needed. I couldn't see the 2 1/16" over the wipers with a standard cowl, as you mentioned. I am sectioning the HD hood and adding 3"...
  3. MAXLLY

    guages in the cowl, 2 5/8" guages

    i thought it would be tougher.... Sontines ju jus gotta peek up z phone... Speedhut had so much you could modify i wondered if they could alter the numeric value, custom guages. Well, they can, and they did it for FREE. This can't be the standard cause Autometer almost laughed when i spoke...
  4. MAXLLY

    Compressor Efficiency Problem

    I can't see an attachment or a picture, is it somewhere else?
  5. MAXLLY

    guages in the cowl, 2 5/8" guages

    I am old...er:rofl: and can't switch from near focus to far focus quickly, surely an issue when your doin' 70-80 mph, wanna look at guages and then re-focus back onto the road. I am going to cowl an HD hood roughly 3" and install the guages under the cowl so i can see them from the drivers seat...
  6. MAXLLY

    Easier trans removal

    I have noticed several guys rebuilding trannys. This may already be known and a no brainer but here it goes. It appears to me that removing the trans is purdy easy until you get to the top 3 bellhousing bolts and the torque converter bolts. I used a 36" long 1/2" drive and came over the...
  7. MAXLLY

    who needs a co poilet

    I was in LA last week and stopped in to see Mike L (picked up the C-3 oiler as well:D) Mike (and clan) is still working on it and getting closer.
  8. MAXLLY

    Ask a McRat!

    Pun!!!:rofl::rofl::rofl::rofl:
  9. MAXLLY

    Help!!! Fixing to have a blaze in my driveway

    Meaningless OT input here.... but good luck! Not much worse than trying to fix an issue on a creeper under the truck.
  10. MAXLLY

    Ask a McRat!

    Anything? How much hose have you put to Casper with the new bottom end and the 42? 200 HP? 300HP? ;)
  11. MAXLLY

    Beginning of the end?

    It's a touch smaller than a 42, Comp 74.7-102.3 and turbine 82 no? :confused:
  12. MAXLLY

    Beginning of the end?

    Compressor Wheel Inducer - 75mm Compressor Wheel Exducer- 100mm Turbine Wheel Inducer - 83mm Turbine Wheel Exducer - 74mm As stated earlier, I picked up the smallest and next to smallest housing they offered, just in case. Didn't know they made a 74mm? Is that (74) one of the older...
  13. MAXLLY

    Beginning of the end?

    I'll pull the spec's Saturday.
  14. MAXLLY

    Need Help!!!!!!!

    get this... I had the same issue, only on 2 cylinders (if it is FICM misfire) the dealer removed the plugs, inspected all the wires into the plugs found 2-3 (didn't say exactly) that were overbent and worn through the insulation. He put electrical tape around them, straightened them up a...
  15. MAXLLY

    Beginning of the end?

    I should mention, I attached a picture of the gasket tracer around the exhaust port of the head. As you can see the gasket line (for the most part) represents the exhaust manifold outline, huge difference! There appears to be room for improvement here but i won't know for sure until i get the...
  16. MAXLLY

    Beginning of the end?

    Jeeez! What a morning. Here are some picts. I am matching the exhaust ports to the gaskets and will attach larger up pipes from exhaust to turbine. This should make HP rise a little... spooling worse... but i hope to get some back with cam design...it should decrease resistance between the...
  17. MAXLLY

    Beginning of the end?

    Agreed, I was wrong to have cast all of us in a bad light. My mistake.:)
  18. MAXLLY

    Beginning of the end?

    I feel young... apparently i am getting older (42). I hammered my body when i was younger. I raced Motocross for Suzuki for several years, baseball, beer league softball etc. I've had 9 surgerys on ankles/knees combined. Number 10 will be soon as i have advanced arthritis in my ankle, the shots...
  19. MAXLLY

    Beginning of the end?

    Dieselson, how are you Dude! Really i am fortunate to have a Wife patient with my Mid life crisis and NEED FOR SPEED. The rest is just droppin LARGE CASH. Be patient, watch the market... It's gonna get competitive (it has to, we are GREEDY AMERICANS) when it does deals will be made, prices...
  20. MAXLLY

    Transfer-Case Housing Wear

    It's HUGE!! I needz ta figga out howz to shrinks it.
Top Bottom