Search results

Search the forum Search Articles
  1. dirtymax36

    LLY: Billet 68 Fleece Cheetah

    I do not know a certain date purchased, but it was from a distributor. This rig will have 60 overs with dual 85% cp3s. Also, I would agree that it's easier and cheaper to put bearings in vs. Repair a whole turbo if it blows. I will pm. You info on the rest of the info from the emails
  2. dirtymax36

    LLY: Billet 68 Fleece Cheetah

    You're probably correct now that I see there aren't any 72 stock housing turbos
  3. dirtymax36

    LLY: Billet 68 Fleece Cheetah

    A few people may have seen the crank broke in this truck and have been trying to stay on budget with the build/turbo options. As of now, i have a billet 68 fleece cheetah, stock housing-not a 4094 housing. I have been talking to Danville and they sell a billet 72mm wheel that is applicable for...
  4. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    I have a few resources that i can get rocker studs from and didnt know if they did anything or not. And Thank you, I was getting this stuff wrote down.
  5. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Another question is a new oil cooler. Since my crank broke, should i have any interest in getting a new one, cleaning my stock one out, or leaving it as is? Pulling my John deere 3720 weighing in at 4500 and the bumper pull trailer at 5k down the interstate my oil temps would get to 230 at...
  6. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Anyone ever had any problems with or without doing rocker studs? 120 round numbers to get, but didnt know if theyre necessary. Also,whats everyones opinions on setting valve lash? Ive hear setting it to 11 thousands vs. 12 makes them run quieter and smoother. I will be running a socal AF 3388 cam.
  7. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Just south of Jacksonville, which type of balance is the best for these motors? I will be running a neutral balance socal flywheel and a fluidampr
  8. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    I am willing to drive a good ways as far as machine and balancing goes as long as the prices are good. Does anyone know a reasonable price for internal balance on a motor this size? Local diesel shop tells me none of these new parts will require a re balance because everything is "zero...
  9. dirtymax36

    Another mild build thread?

    Main studs wouldnt hurt, I would use all new bearings on the bottom end and key the oil pump, get a new welded water pump, 45% nozzles, de lipp the pistons, get new rings, keep stock bore and have it all balanced. Also speaking from expierence, I know they are expensive but look into an...
  10. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Anyone know of a good place and price on getting this motor balanced? Preferably around central Illinois. Thanks for all the help !
  11. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    My neighbor is a machinist and will be doing this pistons for very cheap vs. What other prices would be
  12. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Thanks so much for all the help guys. I plan on tearing it apart and posting pictures soon
  13. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Probably going to stick with De lipped lb7s. Truck will have an s468 billet on it with 60%s. Do you think the 85% pump I have now will be enough to supply 700 or more until I do dual fuelers down the road?
  14. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    The most I would ever hit would be about 800 or 850 max. Unless I kept the 68 now, and threw a 483 in front of it
  15. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    The most it tows is 10k and it's twice a week. What do you think an s468 billet would do mpg wise and hp with 60 overs? Also, what's a billet 68 cheetah worth to anyone with about 8k miles and 0 hooks?
  16. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Thats what i was thinking LWatson, fortunately i already have head studs. I was contemplating on selling my billet fleece 68 cheetah for a s468 billet charger. Any ideas?
  17. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    Wagler performance. The company that does duramax heads
  18. dirtymax36

    LLY: Broken Crank,need opinions on new build sheet

    2 days ago I was pulling up my driveway my lly with 190k miles with mods in my signature, and it went to downshift into first gear (i have a longer driveway) and when it shifted the whole truck shook hard and started knocking/ banging. pulled it inside and checked the balancer with a 36mm wrench...
  19. dirtymax36

    LLY: Billet 68 Fleece Cheetah

    it has zero in and out play but a little side to side but a little more than normal from what im use to being around. For some reason this truck has a lot of turbo bark even in half to 3/4 throttle
  20. dirtymax36

    LLY: ATS 3k on my 05 lly

    Ill talk to the owner of the turbo now, it still has sat on the shelf since then. Ill let you know
Top Bottom