Search results

Search the forum Search Articles
  1. C

    06 lbz with transmission issues

    After much you tube education and research I decided that rebuilding the existing transfer case might not be my best option. I don't want to experience another failure pulling our camper down the road just to end up spending time in a shop. Found kodiac trucks with an improved design for the...
  2. C

    06 lbz with transmission issues

  3. C

    06 lbz with transmission issues

    Visual inspection of the TC showed no signs of penetration from wear of the internal components.
  4. C

    06 lbz with transmission issues

    Pulled the TC over the weekend. Bought two different sets of snap ring pliers and was still. Unable to get the first snap ring off so I can pull the case apart. I ended up making another run for some snap ring pliers that are specifically designed for the outside ring. It still feel like they...
  5. C

    06 lbz with transmission issues

    Saw this video last nite and it sounded pretty much the same. It seems to make sense as well. Not to mention the way the tyranny was banging into gear that I previously mentioned when we were having wiring issues with the injectors. Seems like a good place to start. I may end up yanking the...
  6. C

    06 lbz with transmission issues

    After we installed the new injectors and wiring harness and were still experiencing the shorting through the nicked injector wiring. The transmission was shifting very hard at times. Strangely, so hard that it felt like something could get broke. But after we found the shorting injector wore it...
  7. C

    06 lbz with transmission issues

    Sorry if I am waisting everyone's time. I attempted to provide as much information as I could. I have never experienced anything like this before which makes it difficult to describe. My tuner has a diagnostic tool and while something drastic seems to be happening, intermittently, there are no...
  8. C

    06 lbz with transmission issues

    After about an hour on the hwy on deceleration a very strange noise filled the cab for about a second and a half. Sounded like a canvas zipper the rims picked up then the truck goes back into normal mode. Moderate acceleration seems normal without slipping. But as soon as you let off on the...
  9. C

    06 lbz with transmission issues

    After about an hour on the hwy on deceleration a very strange noise filled the cab for about a second and a half. Sounded like a canvas zipper the rims picked up then the truck goes back into normal mode. Moderate acceleration seems normal without slipping. But as soon as you let off on the...
  10. C

    Still having trouble, need recomendations

    Yes, I was in denial at that time. I didn't want to have to trace down the wiring, it seemed daunting. I feel I just got lucky to find the spot. It was quite difficult to get to even after cutting away the loom ad electrical tape. And that the ecm company seemed to keep finding issues with the...
  11. C

    Still having trouble, need recomendations

    Well at 250k my injectors were due. I replaced the engine harness at 750$. The short could have been anywhere luckily I found where it was. So much money and hours looking for issues. Simple little nick in the wire to ground. Monday morning g quarterbacking is always easy when you know what the...
  12. C

    Still having trouble, need recomendations

  13. C

    Still having trouble, need recomendations

    Wow what a colossal pita. I am pretty sure I found the culprit. After cutting the loom away and tracing down the wiring I realized the injector are twisted up into groups of three. A shared positive and the respective grounds. As I kept getting codes for 1 and 4 I suspected they were the issue...
  14. C

    Still having trouble, need recomendations

    Do you have to have it programmed for your truck or are they universal? What is a reasonable price
  15. C

    Still having trouble, need recomendations

    Thanks that may very well be on the horizon. Today I am going to see if I can locate any damaged wiring from the ecm to the bail connectors. I checked them for resistance but it is difficult to do alone and move wiring around. So I will look for visual evidence. Then I might have to get another...
  16. C

    Still having trouble, need recomendations

    Got the ecm back yesterday and now thrle truck does not try to run right even cold. The repair shop said they found issues with the injector drivers and got them repaired but the truck must have some other rewiring issues. I plan to remove the loom from the ecm to the bail connectors and inspect...
  17. C

    Still having trouble, need recomendations

    My truck I a 2006 lbz. But the injectors I pulled out of it (first time) were returned to LDS and they called to tell me they were LLY Injectors. I didn't realize because the oem plugs fit the new LBZ injectors perfectly. Not sure what is real anymore
  18. C

    Still having trouble, need recomendations

    Not sure, I have had so many issues with different parts not fitting properly. Not sure what a used ecm out of a junk yard would cost or what would be involved. But it might be something I a about to experience
  19. C

    Still having trouble, need recomendations

    After a week and a half GoECM claims they are still having problems with two cylinders. If that is true maybe we have finally found the issue and hopefully they can fix it. But seems like they have been "swapping out parts" for a week now and they are not sure when they will get it done. I have...
  20. C

    Still having trouble, need recomendations

    I did not look at those parameters. I am not sure if they are available in my tuner. I have been focused on electrical issues as the diagnostics indicated
Top Bottom